## Lookup and return multiple values concatenated into one cell

This article demonstrates how to find a value in a column and concatenate corresponding values on the same row. The picture above shows an array formula in cell F3 that looks for value "Fruit" in column B and concatenates corresponding values in column C.

The TEXTJOIN function introduced in Excel 365 (subscription required) allows you to easily concatenate values. It also accepts arrays and nested functions.

However if your Excel version is missing the TEXTJOIN function you can use a User Defined Function, I have all instructions on how to do that in this post. The TEXTJOIN function is missing if you don't have the Office 365 subscription service.

**Table of Contents**

- Lookup and return multiple values concatenated into one cell [Array Formula Excel 365]
- Ignore duplicates [Array Formula Excel 365]
- Ignore duplicates [User Defined Function]
- Add a delimiting character between each value [UDF]
- Wildcard search [Array Formula]
- Wildcard search [User Defined Function]
- Searching for the first characters in a text string [Array Formula]
- Searching for the first characters in a text string [UDF]
- Lookup and return multiple dates concatenated into one cell [Array Formula]
- Lookup and return multiple dates concatenated into one cell [UDF]
- Lookup within a date range and return multiple values concatenated into one cell [Array Formula]
- Lookup within a date range and return multiple values concatenated into one cell [UDF]
- Split search string using a delimiting character and return multiple matching values concatenated into one cell
- Use multiple search values and return multiple matching values concatenated into one cell

**Richard asks:**

Looking for a formula that will take a part number from one column and go and look for all related vehicle applications per that part number and return the vehicle applications to a single cell related back to the part number.

**Answer:**

The array formula used in the image above in cell C11 is:

Here is another example:

Array formula in cell C2:

#### Watch a video where I explain the array formula

Recommended article

Concatenate unique distinct values

The new TEXTJOIN function in excel 2016 lets you do some amazing things with arrays. This post demonstrates how to […]

Concatenate unique distinct values

**How to enter an array formula**

Make sure you enter it as an array formula, follow this:

- Doublepress with left mouse button on cell C2
- Paste above formula to cell
- Press and hold CTRL + SHIFT simultaneously
- Press enter once
- Release all keys

If you did this the right way, the formula now has a beginning and ending curly bracket, like this:

{=TEXTJOIN(" ",TRUE,IF(A2='Vehicle applications'!$C$2:$C$13,'Vehicle applications'!$A$2:$A$13,""))}

Dont enter these characters yourself, they appear automatically if you follow the instructions above.

Then copy cell C2 and paste to cell range C3:C6.

Recommended article

A beginners guide to Excel array formulas

Array formulas allows you to do advanced calculations not possible with regular formulas.

A beginners guide to Excel array formulas

#### User Defined Function

**UPDATE**: *The solution below is for excel versions that has the TEXTJOIN function missing.*

I can´t concatenate values with a formula but I can create a small user defined function.

**User defined function in cell C2:**

+ ENTER

#### Watch a video where I demonstrate the UDF

Picture of sheet "Vehicle applications"

#### Explaining user defined function

**Lookup_concat(**Look_up_value, Search_in_column, Concatenate_values_in_column**)**

Looks for a value in a column and returns a value on the same row from a column you specify. If multiple values are found the corresponding values are concatenated into a single cell.

See picture below.

#### VBA code

Function Lookup_concat(Search_string As String, _ Search_in_col As Range, Return_val_col As Range) Dim i As Long Dim result As String For i = 1 To Search_in_col.Count If Search_in_col.Cells(i, 1) = Search_string Then result = result & " " & Return_val_col.Cells(i, 1).Value End If Next Lookup_concat = Trim(result) End Function

**How to add vba code to your workbook**

- Press Alt-F11 to open visual basic editor
- Press with left mouse button on Module on the Insert menu
- Copy and paste code above to the code module

- Exit visual basic editor
- Save your workbook as a *.xlsm file

### Ignore duplicates

The picture below shows you "odometer" found twice in the table but is only displayed once in cell C2. In other words, no duplicates allowed.

**Array formula in cell C2:**

Watch a video where I explain the formula

Recommended article

Use a drop down list to filter and concatenate unique distinct values

Question: Is there a way to have a unique list generated from a list? Meaning I have a sheet that […]

Use a drop down list to filter and concatenate unique distinct values

#### Explaining array formula in cell C2

*Step 1 - Look for a value in a column and return corresponding values*

IF(A2='Vehicle applications'!$C$2:$C$13, 'Vehicle applications'!$A$2:$A$13, "")

becomes

=IF(1={1; 2; 3; 1; 2; 1; 2; 1; 5; 1; 2; 3}, {"speedometer"; "speedometer"; "speedometer"; "tachometer"; "tachometer"; "odometer"; "odometer"; "odometer"; "odometer"; "fuel gauge"; "fuel gauge"; "fuel gauge"}, "")

and returns

{"speedometer";"";"";"tachometer";"";"odometer";"";"odometer";"";"fuel gauge";"";""}

**Step 2 - Match cell range 'Vehicle applications'!A2:A13 with array from step 1**

The array in step 1 has a duplicate value, to remove those we need to match the values to the list to find out which values are duplicates.

MATCH('Vehicle applications'!A2:A13, IF(A2='Vehicle applications'!$C$2:$C$13, 'Vehicle applications'!$A$2:$A$13, ""), 0)

becomes

MATCH({"speedometer"; "speedometer"; "speedometer"; "tachometer"; "tachometer"; "odometer"; "odometer"; "odometer"; "odometer"; "fuel gauge"; "fuel gauge"; "fuel gauge"}, {"speedometer"; ""; ""; "tachometer"; ""; "odometer"; ""; "odometer"; ""; "fuel gauge"; ""; ""}, 0)

and returns

{1;1;1;4;4;6;6;6;6;10;10;10}

**Step 3 - Check if array equals corresponding row number**

It is certain that the value is a duplicate if they don't match.

IF(MATCH('Vehicle applications'!A2:A13, IF(A2='Vehicle applications'!$C$2:$C$13, 'Vehicle applications'!$A$2:$A$13, ""), 0)=MATCH(ROW('Vehicle applications'!$A$2:$A$13), ROW('Vehicle applications'!$A$2:$A$13)), 'Vehicle applications'!$A$2:$A$13, "")

becomes

IF({1;1;1;4;4;6;6;6;6;10;10;10}=MATCH(ROW('Vehicle applications'!$A$2:$A$13), ROW('Vehicle applications'!$A$2:$A$13)), 'Vehicle applications'!$A$2:$A$13, "")

becomes

IF({1;1;1;4;4;6;6;6;6;10;10;10}= {1;2;3;4;5;6;7;8;9;10;11;12}, 'Vehicle applications'!$A$2:$A$13, "")

becomes

IF({1; 1; 1; 4; 4; 6; 6; 6; 6; 10; 10; 10}= {1; 2; 3; 4; 5; 6; 7; 8; 9; 10; 11; 12}, {"speedometer"; "speedometer"; "speedometer"; "tachometer"; "tachometer"; "odometer"; "odometer"; "odometer"; "odometer"; "fuel gauge"; "fuel gauge"; "fuel gauge"}, "")

and returns

{"speedometer";"";"";"tachometer";"";"odometer";"";"";"";"fuel gauge";"";""}

**Step 4 - Concatenate array**

TEXTJOIN(", ", TRUE, IF(MATCH('Vehicle applications'!A2:A13, IF(A2='Vehicle applications'!$C$2:$C$13, 'Vehicle applications'!$A$2:$A$13, ""), 0)=MATCH(ROW('Vehicle applications'!$A$2:$A$13), ROW('Vehicle applications'!$A$2:$A$13)), 'Vehicle applications'!$A$2:$A$13, ""))

becomes

=TEXTJOIN(", ", TRUE, {"speedometer";"";"";"tachometer";"";"odometer";"";"";"";"fuel gauge";"";""})

and returns

speedometer, tachometer, odometer, fuel gauge in cell C2.

#### User Defined Functions

If your excel version is missing the TEXTJOIN function you need to add two User Defined Functions to your workbook.

They let you return unique distinct values concatenated into one cell, one UDF creates a unique distinct list and the other UDF concatenates the values.

Watch a video where I explain how to use the UDF:

#### VBA code

Function Lookup_concat(Search_string As String, _ Search_in_col As Range, Return_val_col As Range) Dim i As Long Dim temp() As Variant Dim result As String ReDim temp(0) For i = 1 To Search_in_col.Count If Search_in_col.Cells(i, 1) = Search_string Then temp(UBound(temp)) = Return_val_col.Cells(i, 1).Value ReDim Preserve temp(UBound(temp) + 1) End If Next If temp(0) <> "" Then ReDim Preserve temp(UBound(temp) - 1) Unique temp For i = LBound(temp) To UBound(temp) result = result & " " & temp(i) Next i Lookup_concat = Trim(result) Else Lookup_concat = "" End If End Function Function Unique(tempArray As Variant) Dim coll As New Collection Dim Value As Variant On Error Resume Next For Each Value In tempArray If Len(Value) > 0 Then coll.Add Value, CStr(Value) Next Value On Error GoTo 0 ReDim tempArray(0) For Each Value In coll tempArray(UBound(tempArray)) = Value ReDim Preserve tempArray(UBound(tempArray) + 1) Next Value End Function

How to add vba code to your workbook

Back to top

Recommended article

How to use the TEXTJOIN function

The TEXTJOIN function is a new function for office 365 subscribers, it is like the CONCATENATE function on steroids or what the CONCATENATE function […]

How to use the TEXTJOIN function

### Delimiting character

The TEXTJOIN function lets you specify a delimiting character in the first argument.

This UDF lets you specify a delimiting character in the last argument.

=Lookup_concat(A2,'Vehicle applications'!$C$2:$C$13,'Vehicle applications'!$A$2:$A$13,"-")

Watch a video where I explain the UDF

#### VBA Code

Function Lookup_concat(Search_string As String, _ Search_in_col As Range, Return_val_col As Range, str As String) Dim i As Long Dim result As String For i = 1 To Search_in_col.Count If Search_in_col.Cells(i, 1) = Search_string Then result = result & str & Return_val_col.Cells(i, 1).Value End If Next If Len(result) > 0 Then result = Right(result, Len(result) - Len(str)) Lookup_concat = Trim(result) Else Lookup_concat = "" End If End Function

How to add vba code to your workbook

### Wildcard search

The way this works is that the formula in cell C2 checks if value in cell A2 matches a string in cell range C2:C13. In other words, the whole cell must not match but a sub-string must.

Number 1 is found in cell C2,C5 and C7.

**Array formula in cell C2:**

Watch a video where I explain the formula

#### Explaining array formula in cell C2

**Step 1 - Search for string in cell range**

SEARCH(A2,'Vehicle applications'!$C$2:$C$13)

becomes

=SEARCH(1,{"A1";"A2";"A3";"A1";"A2";"A1";"A2";"A4";"A5";"A4";"A2";"A3"})

and returns

{2; #VALUE!; #VALUE!; 2; #VALUE!; 2; #VALUE!; #VALUE!; #VALUE!; #VALUE!; #VALUE!; #VALUE!}

**Step 2 - Return adjacent value**

IF(SEARCH(A2,'Vehicle applications'!$C$2:$C$13),'Vehicle applications'!$A$2:$A$13,"")

becomes

IF({2; #VALUE!; #VALUE!; 2; #VALUE!; 2; #VALUE!; #VALUE!; #VALUE!; #VALUE!; #VALUE!; #VALUE!},'Vehicle applications'!$A$2:$A$13,"")

becomes

IF({2; #VALUE!; #VALUE!; 2; #VALUE!; 2; #VALUE!; #VALUE!; #VALUE!; #VALUE!; #VALUE!; #VALUE!},{"speedometer"; "speedometer"; "speedometer"; "tachometer"; "tachometer"; "odometer"; "odometer"; "odometer"; "odometer"; "fuel gauge"; "fuel gauge"; "fuel gauge"},"")

and returns

{"speedometer"; #VALUE!; #VALUE!; "tachometer"; #VALUE!; "odometer"; #VALUE!; #VALUE!; #VALUE!; #VALUE!; #VALUE!; #VALUE!}

**Step 3 - Remove errors**

IFERROR(IF(SEARCH(A2,'Vehicle applications'!$C$2:$C$13),'Vehicle applications'!$A$2:$A$13,""),"")

becomes

IFERROR({"speedometer"; #VALUE!; #VALUE!; "tachometer"; #VALUE!; "odometer"; #VALUE!; #VALUE!; #VALUE!; #VALUE!; #VALUE!; #VALUE!},"")

and returns

{"speedometer";"";"";"tachometer";"";"odometer";"";"";"";"";"";""}

**Step 4 - Concatenate values**

TEXTJOIN(",",TRUE,IFERROR(IF(SEARCH(A2,'Vehicle applications'!$C$2:$C$13),'Vehicle applications'!$A$2:$A$13,""),""))

becomes

TEXTJOIN(",",TRUE,{"speedometer";"";"";"tachometer";"";"odometer";"";"";"";"";"";""})

and returns "speedometer, tachometer, odometer" in cell C2.

#### User Defined Function

For those of you that have an earlier excel version. Watch this vide where I explain how to use it:

#### VBA Code

Function Lookup_concat(Search_string As String, _ Search_in_col As Range, Return_val_col As Range) Dim i As Long Dim temp() As Variant Dim result As String ReDim temp(0) For i = 1 To Search_in_col.Count If InStr(UCase(Search_in_col.Cells(i, 1)), UCase(Search_string)) Then temp(UBound(temp)) = Return_val_col.Cells(i, 1).Value ReDim Preserve temp(UBound(temp) + 1) End If Next If temp(0) <> "" Then ReDim Preserve temp(UBound(temp) - 1) For i = LBound(temp) To UBound(temp) result = result & " " & temp(i) Next i Lookup_concat = Trim(result) Else Lookup_concat = "" End If End Function

How to add vba code to your workbook

### Searching for the first characters in a text string

The formula and UDF demonstrated below looks for a string that begins with the search string. If search string is a it will match ab, ac but not ba. ab and ac begins with a.

If search string is ab it will match abc, abz but not bca.

**Array formula in cell C2:**

Watch a video where I explain the formula

#### Explaining array formula in cell C2

**Step 1 - Crop strings so they match search string length**

LEFT('Vehicle applications'!$C$2:$C$13, LEN(A2)

becomes

LEFT({"abc";"bvg";"cmm";"adf";"bvjt";"agf";"bvg";"dkl";"ehg";"aqw";"bvg";"cs"}, LEN("a")

and returns

{"a";"b";"c";"a";"b";"a";"b";"d";"e";"a";"b";"c"}

**Step 2 - Check if "a" is equal to values in array**

IF(A2=LEFT('Vehicle applications'!$C$2:$C$13,LEN(A2)),'Vehicle applications'!$A$2:$A$13,"")

becomes

IF("a"={"a";"b";"c";"a";"b";"a";"b";"d";"e";"a";"b";"c"},'Vehicle applications'!$A$2:$A$13,"")

and returns

{"speedometer";"";"";"tachometer";"";"odometer";"";"";"";"fuel gauge";"";""}

**Step 3 - Concatenate values**

TEXTJOIN(",", TRUE, IF(A2=LEFT('Vehicle applications'!$C$2:$C$13, LEN(A2)), 'Vehicle applications'!$A$2:$A$13, ""))

becomes

TEXTJOIN(",", TRUE, {"speedometer";"";"";"tachometer";"";"odometer";"";"";"";"fuel gauge";"";""})

and returns

"speedometer,tachometer,odometer, fuel gauge" in cell C2.

#### User defined function

If your excel version is missing TEXTJOIN function you can easily use the UDF below.

Function Lookup_concat(Search_string As String, _ Search_in_col As Range, Return_val_col As Range) Dim i As Long Dim result As String For i = 1 To Search_in_col.Count If Left(Search_in_col.Cells(i, 1), Len(Search_string)) = Search_string Then result = result & " " & Return_val_col.Cells(i, 1).Value End If Next Lookup_concat = Trim(result) End Function

How to add vba code to your workbook

### Get the Excel file

excel-vba-return-multiple-answers-into-one-cell-starting-with-a-specific-characterv2.xlsm

### Lookup and return multiple dates concatenated into one cell

Excel sees dates as numbers so they can be used in formulas and calculations, Jan 1, 1900 is 1 and June 7, 2017 is 42893. To concatenate dates and not numbers we need to use the TEXT function to convert numbers to dates.

(Pic shows dates formatted in this order: YYYY-MM-DD)

**Array formula in cell C2:**

Watch a video where I explain the formula

#### Explaining formula in cell C2

**Step 1 - Convert datenumbers to dates**

TEXT('Vehicle applications'!$A$2:$A$13,"YYYY-MM-DD")

becomes

TEXT({41642; 41738; 41657; 41708; 41709; 41653; 41692; 41656; 41717; 41674; 41675; 41664},"YYYY-MM-DD")

and returns

{"2014-01-03"; "2014-04-09"; "2014-01-18"; "2014-03-10"; "2014-03-11"; "2014-01-14"; "2014-02-22"; "2014-01-17"; "2014-03-19"; "2014-02-04"; "2014-02-05"; "2014-01-25"}

**Step 2 - Check if "a" is equal to values in array**

IF(A2='Vehicle applications'!$C$2:$C$13,TEXT('Vehicle applications'!$A$2:$A$13,"YYYY-MM-DD"),"")

becomes

IF(A2='Vehicle applications'!$C$2:$C$13,{"2014-01-03"; "2014-04-09"; "2014-01-18"; "2014-03-10"; "2014-03-11"; "2014-01-14"; "2014-02-22"; "2014-01-17"; "2014-03-19"; "2014-02-04"; "2014-02-05"; "2014-01-25"},"")

becomes

=IF({TRUE;FALSE;FALSE;TRUE;FALSE;TRUE;FALSE;FALSE;FALSE;TRUE;FALSE;FALSE},{"2014-01-03"; "2014-04-09"; "2014-01-18"; "2014-03-10"; "2014-03-11"; "2014-01-14"; "2014-02-22"; "2014-01-17"; "2014-03-19"; "2014-02-04"; "2014-02-05"; "2014-01-25"},"")

and returns

{"2014-01-03";"";"";"2014-03-10";"";"2014-01-14";"";"";"";"2014-02-04";"";""}

*Step 3 - Concatenate values*

TEXTJOIN(", ",TRUE,IF(A2='Vehicle applications'!$C$2:$C$13,TEXT('Vehicle applications'!$A$2:$A$13,"YYYY-MM-DD"),""))

becomes

TEXTJOIN(", ",TRUE,{"2014-01-03";"";"";"2014-03-10";"";"2014-01-14";"";"";"";"2014-02-04";"";""})

and returns

"2014-01-03, 2014-03-10, 2014-01-14, 2014-02-04" in cell C2.

#### User defined function

If your excel version is missing TEXTJOIN function you can use this UDF.

Function Lookup_concat(Search_string As String, _ Search_in_col As Range, Return_val_col As Range) Dim i As Long Dim result As String For i = 1 To Search_in_col.Count If Search_in_col.Cells(i, 1) = Search_string Then result = result & ", " & Return_val_col.Cells(i, 1).Value End If Next Lookup_concat = Right(result, Len(result) - 2) End Function

How to add vba code to your workbook

### Lookup within a date range and return multiple values concatenated into one cell

The following formula and UDF use a start and end date to filter dates in col C (table2) and return corresponding items in col A.

**Array formula in cell D3 (table1):**

Watch a video where I explain the formula

#### Explaining formula in cell D3

**Step 1 - Build logical expression to filter dates in col C (table 2) using start and end dates in table 1**

(A3<='Vehicle applications'!$C$2:$C$13) *(B3>='Vehicle applications'!$C$2:$C$13)

becomes

(42788<={42791; 42794; 42798; 42742; 42776; 42791; 42751; 42815; 42798; 42788; 42807; 42819}) *(42791>={42791; 42794; 42798; 42742; 42776; 42791; 42751; 42815; 42798; 42788; 42807; 42819})

and returns

{1;0;0;0;0;1;0;0;0;1;0;0}

**Step 2 - Return value on same row as matching date**

IF((A3<='Vehicle applications'!$C$2:$C$13) *(B3>='Vehicle applications'!$C$2:$C$13), 'Vehicle applications'!$A$2:$A$13, "")

becomes

=IF({1;0;0;0;0;1;0;0;0;1;0;0}, {"S"; "P"; "E"; "S"; "O"; "N"; "R"; "P"; "Q"; "F"; "X"; "V"}, "")

and returns

{"S";"";"";"";"";"N";"";"";"";"F";"";""}

**Step 3 - Concatenate values**

TEXTJOIN(", ", TRUE, IF((A3<='Vehicle applications'!$C$2:$C$13) *(B3>='Vehicle applications'!$C$2:$C$13), 'Vehicle applications'!$A$2:$A$13, ""))

becomes

TEXTJOIN(", ", TRUE, {"S";"";"";"";"";"N";"";"";"";"F";"";""})

and returns

"S, N, F" in cell D3.

#### User Defined Function

If your excel version is missing TEXTJOIN function you can use this UDF.

Function Lookup_concat(Search_Start As String, Search_End As String, _ Search_in_col As Range, Return_val_col As Range) Dim i As Long Dim result As String For i = 1 To Search_in_col.Count If Search_in_col.Cells(i, 1) <= Search_End And Search_in_col.Cells(i, 1) >= Search_Start Then result = result & Return_val_col.Cells(i, 1).Value & ", " End If Next If Len(result) > 0 Then Lookup_concat = Left(result, Len(result) - 2) Else Lookup_concat = "" End If End Function

How to add vba code to your workbook

### Split search string using a delimiting character and return multiple matching values concatenated into one cell

This UDF lets you use multiple search strings and fetch corresponding values concatenated to one cell.

Example, search string in cell A2 (table 1) is A+B, the search delimiting character is +. The UDF looks for both A and B in column A in table 2. Cell A2 and A3 matches A and B so the values from column B (Biology and Chemistry) are retrieved and concatenated to cell B2.

**Formula in cell B2:**

This is a User Defined Function so to use the above formula you need to first insert a few lines of code to your workbook.

#### User Defined Function

Function Lookup_concat(Search_string As String, Search_del As String, _ Search_in_col As Range, Concat_del As String, Return_val_col As Range) Dim i As Long, j As Long Dim result As String Dim srchArr() As String srchArr = Split(Search_string, Search_del) For i = 1 To Search_in_col.Count For j = LBound(srchArr) To UBound(srchArr) If Search_in_col.Cells(i, 1) = srchArr(j) Then result = result & Return_val_col.Cells(i, 1).Value & Concat_del End If Next j Next Lookup_concat = Left(result, Len(result) - Len(Concat_del)) End Function

How to add vba code to your workbook

Remember to save your workbook as an *.xlsm file or your code is lost the next time you open your workbook.

### Get the Excel file

plit-search-string-using-a-delimiting-character-and-return-multiple-matching-values-concatenated-into-one-cell.xlsm

### Use multiple search values and return multiple matching values concatenated into one cell

Formula in cell G3:

#### VBA Code

Function Lookup_concat(Search_string As Range, Search_in_col As Range, Concat_del As String, Return_val_col As Range) Dim i As Long, j As Long Dim result As String For i = 1 To Search_in_col.Count For Each Value In Search_string If Search_in_col.Cells(i, 1) = Value Then result = result & Return_val_col.Cells(i, 1).Value & Concat_del End If Next Value Next i Lookup_concat = Left(result, Len(result) - Len(Concat_del)) End Function

#### Get Excel *.xlsm file

Use multiple search values and return multiple matching values concatenated into one cell.xlsm

Use a drop down list to filter and concatenate unique distinct values

Question: Is there a way to have a unique list generated from a list? Meaning I have a sheet that […]

Concatenate cell values based on a condition [No VBA]

Add cell values to a single cell with a condition, no VBA in this article.

Joining multiple cell values in Excel is not easy, for example, the CONCATENATE function allows you to only reference a […]

How to use the TEXTJOIN function

The TEXTJOIN function is a new function for office 365 subscribers, it is like the CONCATENATE function on steroids or what the CONCATENATE function […]

Concatenate unique distinct values

The new TEXTJOIN function in excel 2016 lets you do some amazing things with arrays. This post demonstrates how to […]

Working with classic ciphers in Excel

What's on this page Reverse text Insert random characters Convert letters to numbers How to shuffle characters in the alphabet […]

### 286 Responses to “Lookup and return multiple values concatenated into one cell”

### Leave a Reply to Miranda

### How to comment

**How to add a formula to your comment**

<code>Insert your formula here.</code>

**Convert less than and larger than signs**

Use html character entities instead of less than and larger than signs.

< becomes < and > becomes >

**How to add VBA code to your comment**

[vb 1="vbnet" language=","]

Put your VBA code here.

[/vb]

**How to add a picture to your comment:**

Upload picture to postimage.org or imgur

Paste image link to your comment.

**Contact Oscar**

You can contact me through this contact form

Is there a way to list speedometer tachometer, etc... on separate lines in the same cell instead of separating them with a space? Similar to hitting the ALT+ENTER to create two lines of info in one cell like this:

cell C2

speedometer

tachometer

Tom,

Sure!

VBA code:

Function Lookup_concat(Search_string As String, _

Search_in_col As Range, Return_val_col As Range)

Dim i As Long

Dim result As String

For i = 1 To Search_in_col.Count

If Search_in_col.Cells(i, 1) = Search_string Then

result = result & " " & Return_val_col.Cells(i, 1).Value & Chr(10)

End If

Next

Lookup_concat = Trim(result)

End Function

Instructions:Select cells.

Press CTRL + 1.

Press with left mouse button on tab "Alignment"

Enable "Wrap text"

Press with left mouse button on ok button!

Oscar,

I just left you a similar comment on another page. Is there a way to do this and put the results into new rows instead of the same cell?

1 Capacitor 1

2 Capacitor 2

Would become:

1 Capacitor 1 Speedometer

1 Capacitor 1 tachometer

1 Capacitor 1 odometer

1 Capacitor 1 fuel gauge

2 Capacitor 2 Speedometer

2 Capacitor 2 tachometer

... and so on

Thanks!

Peter

Hi Oscar,

Your macros is awesome!

A quick question though, if I need to search and return values in rows instead of columns, how can I edit the macro to reflect this? My interim fix was to transpose the entire table.

Thanks!

Cheers,

Faus

Oscar thank for the quick response. Is there a way to do this without UDF?

What I am trying to do is make an output matrix which has various wire types listed in column B4 thru B23 and terminating connector types listed across row C4 to AA4. I am trying to populate basically all of my open cells between C4 and AA23 with actual six digit part numbers. In some cases there are two six digit part numbers that must show up in the same cell. The data is being looked up in another tab in the spreadsheet with wire type in column C, part numbers in column B and connector type in column E. I also have a column called Standard flagged with a 1, 0 or black. What I am currently doing is using a combination of Index and Match in my output matrix that looks up a part number based on three criteria, wire type, connector type and a standard part (flagged with 1). If a row meets those three criteria the part number is grabbed and filled into the output matrix. I have that part working, but don't know how to list two part number in the same cell if that condition exists.

Is there a better way of doing this task?

Tom,

You could try to concatenate two formulas in a cell. See this page: https://excel.tips.net/Pages/T002788_Simulating_AltEnter_in_a_Formula.html

Thanks Oscar. Does the UDF stay with the file (embedded) if it is emailed and shared around the office or do you have to setup the VBA code on each individual's machine?

Tom,

The udf stays with the *.xls file.

Oscar thanks for this one. Saved me lot of time

Gonzo,

you are very welcome!

Oscar, I love this and am planning to use the code for a stock checking application. My Question is can it be modified to put the results on separate colums [in line with each search row]

Search Item Item1 Item2 Items 3

Ray, yes it can. But it would be easier to use this formula: How to return multiple values using vlookup in excel with a minor change.

How to create an array formulaCopy (Ctrl + c) and paste (Ctrl + v) array formula into formula bar.

Press and hold Ctrl + Shift.

Press Enter once.

Release all keys.

How to copy array formulaSelect cell

Copy (Ctrl + c)

Select cell or cells to the right

Paste (Ctrl + v)

Hi Oscar

I want to use your above formula with a calendar in excel but I keep getting a #VALUE! error.

I have a data sheet that has data simular to this

1/2/2011 Red

1/3/2011 Blue

1/3/2011 Green

1/5/2011 Purple

I copied the lookup_concat udf and my function in column F5 of my calendar is...

=Lookup_concat(F4, Data!A4:A147, Data!B4:B147)

F4 is the field that has my date I was to search for.

Julie,

I am guessing the dates causes problems.

1. Select F4

2. Press Ctrl + 1

3. Press with left mouse button on Category: General

4. Remember the value

5. Press left mouse button on Cancel

Select the same date in range Data!A4:A147.

Repeat step 2 to 5.

Are the values the same?

How Excel Stores Dates And Times

Yes they are the same. I does work with vlookup but I want to be able to return multiple values.

This is my vlookup function in another cell and it does work. =VLOOKUP(D4,Data!A4:B378,2,FALSE)

Julie,

I have no idea!

Send me a workbook without sensitive data and I´ll see what I can do.

Wow Oscar, you rule! Searched the internet and beyond looking for this tiny fuction, thank you very much!

Bernard,

Thanks!

Hi Oscar - nice code you've got up here, and great explanation. This is close to what I need, but I'm trying to take multiple input values and output to one cell. I'm doing a skills inventory, where someone could have multiple skills like say Excel and Powerpoint. I'd like to be able to enter multiple numbers and return multiple values - got any tricks for that? Thanks!

Michael,

Yes, open attached file: excel-vba-search-for-multiple-values-and-return-multiple-values-into-one-cell.xls

Hi Oscar, your site had been a phenomenal help so far to me. I am interested in expanding the search multiple values/return multiple values to include multiple criteria

Would be entered something like this:

Lookup_Concat(Return_Col, Search_Col1, Range1, Search_Col2, Range2, Search Col 3, Range3)

What change(s) to the multiple value/multiple return would I make? Thanks! - A

Oscar - you make this look entirely too easy. I also came up with a way (with some help from a friend) where we changed the lookup key to text and used some string functions to get the desired result w/out VBA. This is more elegant, however. If you like I can post/send the file, I'm just not sure how to do that from this page. Thanks again! - Mike

Got the example file, but showed #NAME? error in column C under Related vehicle applications.

Looks like an error in the code?

I had the same problem. It turned out that I didnt have macros enabled in the trust center

a,

I opened the file and it works here.

Is there anyway to get it to ignore duplicates entries?

so that each 'vehicle application' is listed once in the 'related vehicle applications' no matter how many times it appears in the 'vehicle application' list?

Matt,

Yes, get example file:

excel-vba-return-multiple-unique-values-into-one-cell.xls

How would you integrate the multiple criteria lookup_concat function with the above mentioned functionality to remove duplicates?

Thank you Oscar

that has proved to be very useful

Hi Oscar thank you for your code it works well for me with a small exception. I have used your code shown to Tom (26th Jan 2011). When the code concatenates two or more text strings the text is placed on successive lines but there is always a ALT + ENTER character at the end of the text that adds an extra line below the last text string.

Is there any way to prevent the this last ALT + ENTER from being added?

Thank you for your help

Chris,

Search_in_col As Range, Return_val_col As Range)

Dim i As Long

Dim result As String

For i = 1 To Search_in_col.Count

If Search_in_col.Cells(i, 1) = Search_string Then

result = result & " " & Return_val_col.Cells(i, 1).Value & Chr(10)

End If

Next

result = Left(result, Len(result)-1)

Lookup_concat = Trim(result)

End Function

Oscar, Very Nifty, Thanks

Modified to insert commas & ampersand:

Function Lookup_concat(Search_string As String, _

Search_in_col As Range, Return_val_col As Range)

Dim i As Long

Dim n As Integer

Dim c As Integer

Dim result As String

For i = 1 To Search_in_col.Count

If Search_in_col.Cells(i, 1) = Search_string Then

n = n + 1

End If

Next

For i = 1 To Search_in_col.Count

If Search_in_col.Cells(i, 1) = Search_string Then

c = c + 1

Select Case c

Case 1

result = Return_val_col.Cells(i, 1).Value

Case n

result = result & " & " & _Return_val_col.Cells(i, 1).Value

Case Else

result = result & ", " & Return_val_col.Cells(i, 1).Value

End Select

End If

Next

Lookup_concat = Trim(result)

End Function

This is great. How do I make this UDF available for all my spreadsheets without having to inserting it into each spreadsheet?

This is so wonderful. Is there a way to add commas between each entry?

Vicki,

Hi, this works great with the comma though is it possible to not start the result with a comma as it appears to do but end with a comma in the result?

Was their ever a response to this? Is there a way to not start off with a comma but have any entries after the first be separated with a comma?

Hi Holly,

Try this.

Thanks,

Alex

_____________________________________________

Function Lookup_concat(Search_string As String, _

Search_in_col As Range, Return_val_col As Range)

Dim i As Long

Dim result As String

For i = 1 To Search_in_col.Count

If Search_in_col.Cells(i, 1) = Search_string Then

result = result & ", " & Return_val_col.Cells(i, 1).Value

End If

Next

result = Mid(result, 2, Len(Trim(result)) - 1)

Lookup_concat = Trim(result)

End Function

Alex,

That worked perfectly!! Thank you so much for your help!

Holly

Is there anyway to get this to work by adding in a third factor? I have a similar list with part numbers, but I only want to concatenate the products (or stores in my case) that have prices.

Rich,

Excel toolbox: Save your custom functions and macros in an Add-In

Thanks Oscar, I keep getting #VALUE! I believe this is happening because some of the search fields have #NAME errors. Any way to modify the script to ignore errors and continue looking?

Hi Oscar,

You are unbelievable with this! I have a question....

What if the return values from the function (Return_val_col) were integers and instead of listing all of the separate values in one cell, the function returned the sum of the values...

do you know how I could do that using the function that you created?

Naajia,

I attached both a vba and a formula solution. I do recommend using the formula.

https://www.get-digital-help.com/wp-content/uploads/2010/12/Naajia.xls

Oscar -- found this with a Google search, and it is EXACTLY what I needed. THANK YOU for your contributions here!!! Saved me a TON of time on a vital project.

Thank you Oscar.

Found this the same as Brad with Google search.

This very nice and clearly illustrated example helped me quite a bit.

Hello,

I was wondering if you could help me change the column look-up to a row based look-up. Instead of searching in one column I would like to search in 1 row for a certain number. Then display the results just as you have done.

Thank you.

Katherine

Oscar,

Like the rest, I'm thrilled to find your formula. Could it be modified to have a second (and maybe third) search column, kind of like a COUNTIFS() function would do?

Thanks,

Peter

Peter,

Did you figure out a way to set this up with multiple criteria?

Where I've put 17, just include the number of columns further away.

Option Explicit

Function Lookup_concat(Search_string As String, _

Search_in_col As Range, Return_val_col As Range)

Dim i As Long

Dim result As String

For i = 1 To Search_in_col.Count

If Search_in_col.Cells(i, 1) = Search_string Then

result = result & ", " & Return_val_col.Cells(i, 1).Value & " " & Return_val_col.Cells(i, 17).Value

End If

Next

Lookup_concat = Mid(result, 3)

End Function

Here is a link to an article I wrote in a "mini" blog I host which contains a UDF that I derived from this blog article's code but to which I added several additional optional arguments that provide some useful (I hope) flexibility when performing your lookup...

https://www.excelfox.com/forum/f22/lookup-value-concatenate-all-found-results-345/

Katherine,

Yes, see attached example file!

excel-vba-return-multiple-answers-into-one-cell-horizontal-lookup.xls

Like all the others I Googled to find what I needed and came upon this page. So thanks for the insight. Thanks Katherine for asking the same question that I was looking for. Thanks Oscar for providing the answer it worked great.

Rick Rothstein (MVP - Excel),

I tried your udf and all the optional arguments. It works great, I am sure it will be useful!

Hi Oscar,

Thanks very much for this UDF. Very useful. Is there a way that you know it can be used in a data validation list? I get an error if I use it and I read somewhere else that it's not possible to use UDF's. Basically I have a large table with fields 'country', 'operator', 'plan'. In another table I want to select a country, then in a second column get a list of (unique) operators available in that country and select one, and in a third column then select a plan based on the country operator choice in the other columns. Your UDF (with the appropriate separator and a little tweaking perhaps) would be ideal for that, but I need to find a way to use it in selection lists.

Thanks,

Mario.

Mario Hoek,

I think you will find these posts interesting:

https://www.get-digital-help.com/2010/07/17/create-dependent-drop-down-lists-containing-unique-distinct-values-in-excel/

https://www.get-digital-help.com/2012/02/22/dependent-data-validation-lists-in-multiple-rows/

Oscar,

First off, thanks so much for all your help. Your site has helped me many times.

My question stems off of Tom's question, and I've basically used the same code you've provided to Tom. My problem is, I have a range of a week (e.g. 5/7/12 - 5/13/12, 5/14/12 - 5/20/12, etc.) and from a list of individual dates, I have to determine if a date falls into that range, then it needs to return the corresponding text for each of those dates within the same cell (concatenated).

So if I have a range of 5/7/12 - 5/13/12, I need the macro to look at a list of dates, determine which of the dates fall between that range, and return the text in the adjacent column to that individual date.

Thanks again!

Jonah,

VBA Macro

Get the Excel *.xslm file

Concatenate-values-within-matching-date-ranges1.xlsm

Oscar,

Thanks so much for replying. My output would actually need to look more like a concatenated form of column F.

Column B would actually be a non-concatenated search input (with one date for each text).

For example, given the date range from D2 to E2, the macro should look up which date in A2:A5 corresponds to that range, and return the concatenated form of each of the text.

See the excel file: https://docs.google.com/open?id=0B0B7Aw7pD4WCanJlMnlJbHpQRDQ

Thanks again!

Oscar,

Kindly disregard the last post. I've figured it out using your explanation on this page and other pages on your site.

I greatly appreciate the help you've so graciously given.

Hi Oscar

I am using your function Lookup_concat to fetch data from some other excel file. But I am facing a problem. If I use Vlookup (built-in excel function), then I get the result even if source file is closed. But Lookup_concat function only gives result if source file is opened, otherwise it gives #VALUE!

Pls help me here.

Thanks

Amit Gandhi

Amit Gandhi,

VBA does not support accessing information from closed workbooks.

Links:

Accessing ranges in closed workbooks in custom functions

INDIRECT and closed workbooks

Excel Automation: How to use an external link as an argument in a user-defined function?

Hi Oscar

I read your links provided, but i am unable to get the desired result, as I am not very much expert in VBA.

One link is suggesting to use ADO, other is suggesting to use HYPERLINK (When an Excel workbook is closed, it cannot be referenced by the INDIRECT function, however as Greg states this can be achieved via an acrimonious HYPERLINK function without having to resort to VBA/coding of any kind.)

Can you please help me how to modify LOOKUP_CONCAT function to get result from closed workbooks as well.

Amit Gandhi,

I would happily help you out but I have no clue.

Thanks Oscar for your valuable time.

Hi oscar

Thanks for your helpful website.I need to lookup in one column and return the results of two other columns.also I need to lookup in one column and return the results of two other column if the date in datecolumn in that row is equal to date in cell B2.I modified your vba code but i don't know it is correct or not beacuse when i put it in my spreadsheet it take a lot of time to calculate.and sometimes didn't work and return error value.

I need your comments.

here is my sample data:https://docs.google.com/open?id=0B6n9ww2vwHPMSFZwelNDRGt0Nmc

Hi Oscar,

Thanks for informative post. I need to lookup values from Column C (ticket #) based on Column A (Date) and Column B (Person). The look-up could return multiple values from column C (multiple tickets for a date). I need to concatenate multiple values in one cell of date –person matrix. UDF discussed here works but only problem is that it is not doing lookup on multiple columns. Can you please help?

Thanks in advance

Thank you for this - it's a brilliant, simple solution that works a treat.

Hi Oscar -

TO echo the question Peter posted in March - is there anyway to modify this formula and UDF so that it searches multiple criteria in 2 different columns?

This UDF is FANTASTIC!

Jen

I am on it.

Thanks!

Hi Oscar! Are you having any luck with this? I've looked everywhere for help with this and nothing...I'm counting on you!

Thanks!

Just discovered that this is case sensitive - I was confused that it wasn't finding things that other Excel functions (such as VLOOKUP) can find. How can I make it ignore the case of a letter? To force the source and the user input to be the same is not practical, unfortunately.

Ignore previous comment. To resolve the case sensitive issue, pop "Option Compare Text" on a line at the top of the module and searches will not be case sensitive.

Oscar, you are a life saver. I did have to change on line of code to get it to work for my needs.

From:

result = result & "," & Return_val_col.Cells(i, 1).Value

To:

result = Return_val_col.Cells(i, 1).Value & "," & result

Works fine now, but I one slight change would make it perfect:

Is there a way to make it only return UNIQUE values? Instead of:

207,207,205,206

It would say

207,205,206

I posted a link to a function I developed earlier in this thread which will allow you to do what you have asked for. Here is that link again...

https://www.excelfox.com/forum/f22/lookup-value-concatenate-all-found-results-345/

Rick,

Is your function able to search based on multiple criteria and return multiple values concatenated into one cell?

This is what I'm desperate to find an answer for!

Thanks,

It is a function, so you can call it for each of your search words and concatenate the results together (if you have a lot of search words, you may need to construct a loop to process them efficiently). If you want me to add additional functionality to my code, post the request against my mini-blog article over in my blog-site's forum location and I will attempt to comply there.

https://www.excelfox.com/forum/f22/lookup-value-concatenate-all-found-results-345/

Hi Thanks for this,

How would change search_string to lookup any value greater than 0?

Hi Oscar,

The code works great, thank you! I keep getting #VALUE for items that do not have a match.

I have a calendar and some things are in progress, planned, etc. If for a day, there are no planned items, I want it to be blank in the planned column...can't seem to figure it out. Can solve it with IF(ISERROR), but would like to incorporate into UDF, and can't seem to figure it out.

Many thanks!

Back awhile ago in the comment section for this blog article, I posted a link to an alternative UDF to the one Oscar posted which provided some extra functionality. One of the things my UDF does is return the empty string ("") when the text being searched for cannot be found. Here is a link to my mini-blog article where I posted that alternative UDF code for your consideration...

https://www.excelfox.com/forum/f22/lookup-value-concatenate-all-found-results-345/

thanks!

Christy,

I tried the udf for items that don´t have a match and I get a blank cell in those cases. I am using excel 2010.

I am using Excel 2007. The code Rick referred to worked, but it makes Excel hang way too much.

Yes, I have found the same issue.

I am having the problem that this code only looks in formulas not values, whereas Rick's does look in the values and finds what is needed... however, I can't use his code as it just crashed the computer because of the large amounts of data I am dealing with! :(

Is there any way to adapt this module to look in values?

Hi I was wondering if instead of showing the results separated by a space in on cell, I could make the results added to eachother in one cell.

I'm trying to lookup more than one value (number,e.g.prices)but show it added to all the other results.

thanks in advance

@Ralfy - I am having trouble visualizing what you are asking for... can you post a small sample of data and show us what you want that data to look like after it has been processed?

I have a small table where the data get imputed it has a row for the name of each person in charge of getting sales and credits for a 4 hrs period (4 to 5 rows) the columns are: name of person, amount of credits, $ sale up to that time, sale for the person ( has a formula that takes away what anyone before makes to know what this person sale is, credit productivity (sale/credits)

Then there is worksheet for each person where it looks up the sales, credit and productivity for that person for the day.

All of that I already have set up using vlookup. My issue is when the data sheet has more than one entry per day per day. I would like the lookup function to recognize more than one entry and add them up then insert to the persons worksheet.

Hope that helps,

Thank you in advance for your help, I hope to resolve this issue soon.I have a file, Cells A1:A50 have multiple e-mail addresses separated by ";". On Column B, I have a list of 1,000 e-mail addresses, each cell on column B has only one address. What I am trying to get to, is on Column C, to see which e-mails from cell A1 are found in the entire column B. Then which e-mails from cell A2 are found in the entire column B, and so on. If I need to send a spreadsheet please let me know. Thank you for your help.

Give this a try... put the following formula in C1 and copy it down:

=IF(COUNTIF(A:A,"*"&B1&"*"),"X","")

Ha, dummy me, I was thinking it too complicated, with Index and Match formulas. Should have thought the other way around, many thanks for your help.

Alright, here is the next step on this. Now that I can find which individual e-mail address from Column A is listed in the entire column B, I need to do a look-up and give me the corresponding category listed on column C.

Column A Column B Column C

e-mail1 e-mail1;e-mail2;e-mail4 CatA

e-mail2 e-mail3;e-mail6;e-mail7 CatB

How would I go about finding which value from Column A, is listed in Column B and then list it's corresponding value from column C?

Thank you in advance for your help with this.

Samsam,

e-mail1;e-mail2;e-mail4

What is this? Three emails in the first cell in column B or where are they entered?

Correct, Column A cells have individual addresses that are listed somewhere in the multitude of e-mails from Column B, which then have a corresponding category in column C. So while column A lists only 1 e-mail per cell, Column B cells have anywhere from 2 to 10 e-mail addressed in one cell. Then column C shows the category in which those e-mails belong.

SamSam,

I moved cell range B1:C6 to C1:D6. The formula in cell B1: =INDEX($D$1:$D$6,MATCH(A1,$C$1:$C$6,0))

Hi Oscar,

I've been trying to find the solution for my lookup problem for a while now and you seem like the right person to ask... Your lookup code works great (thanks) but I need to do two or three lookups within identified matching records... in other words:

Sheet 1 - 'File data'

1. client name

2. filename

3. file date create

Sheet 2 - 'Client data'

1. client name

2. client ID

3. service start date

4. service end date

I need to map correct client ID based on lookup by client name and then based on finding which service date range does client file created date fit into.

So I need to:

1. First search - Identify Client records with matching name

2. Second search - Within that range, I need to find fitting date range.

Your lookups are great when I search entire sheets but I need to do second seach based on subset of data.

Any help will be much appreciated.

Thanks!

Nena

Nena,

read this:

Search a table and use the returning value to search another table

Thanks Oscar,

regards,

Nena

[...] tableFiled in Dates, Excel, Search/Lookup on Sep.12, 2012. Email This article to a Friend Nena asks:Hi Oscar,I've been trying to find the solution for my lookup problem for a while now and you seem [...]

Thanks for posting very nice and effective UDF.

I had to change one line of code to get it to work for my needs.

From:

result = result & " " & Return_val_col.Cells(i, 1).Value

To:

result = result & "," & Return_val_col.Cells(i, 1).Value

but cannot omit last comma from the returned value. Any help in this respect will be highly appreciated. Thanks in advance.

sorry again after changing one line return value display like :

10, 12, 10,

but I want to omit last comma which will return like :

10, 12, 10

Thanks in advance

You get a **trailing** comma with that code line, not a LEADING comma??? You should double-check that as that code line can only produce a leading comma. And the way to get rid of it is by changing the last line of code from this...

Lookup_concat = Trim(result)

to this...

Lookup_concat = Mid(result, 2)

I know the number of comments for this article are quite long, so you may have missed the link I posted to a function I developed which extends the functionality of Oscar's UDF by adding additional options, so you might want to check it out here...

https://www.excelfox.com/forum/f22/lookup-value-concatenate-all-found-results-345/

Hi Oscar...this is a very interesting function and helped me a lot so far.

My file though is a bit more complicated..

I have multiple info in one cell separated with ";" (example AD1; AD2; AD3) lets say that these are servers (File name SERVERS) and in each server I have multiple applications. I have now another file that has all the applications per server per line in excel (each line has one server one application. File name: APPS).

I want starting from the file SERVERS to look up the servers that are in one cell find them in the second file APPS and bring all the applications also in one cell in the file SERVERS.

Any ideas here?

Thanks in advance

C

Chrisa,

see this post:

Lookup multiple values in one cell (vba)

Hi Oscar

the module seems to be looking in formulas by default rather then in values, which means it does not find any of the data in my fields (as they are all generated by concatenate formulas!)

You don't happen to have a fix for this by any chance???

Many thanks for your help

F

Hello again Oscar,

I just realised that the UDF does look in values... but it does not work on my sheet that contains xml data... it just returns #value

Hi Oscar,

I used your code for the option explicit fuction lookup_concat as well as the function unique. My problem lies in when i incorporate that into a nested formula:

=IF(D5"PO",Lookup_concat(B5,$B$2:$B$5000,$F$2:$F$5000),F5)

the formula works perfectly in the cells, but once i put that into the vba it gets stuck in an eternal loop and goes from

please help me.

my formula was supposed to read:

Valerie,

I tried a nested formula and it works here (excel 2010).

ok, so I realized that when I was watching my macro run step by step using F8 it appeared to be stuck in that loop once I hit your function. Once I just ran the macro (including your function) it worked perfectly. thank you for checking that. Do you have a place where I could continue to ask you questions with excel unrelated to this function?

Thank you so much again for your help.

valerie,

Do you have a place where I could continue to ask you questions with excel unrelated to this function?

No, most people search my site for answers. If they can´t find what they are looking for, they ask questions in blog posts.

I have a similar problem, but am finding that to search within vs for an exact value is causing the CONCAT formula to not work? Trying to look for value D2 withing column 2 of a Table1, then to return all values in column 3 of the table. Don't care if there are commas separating them, etc. Forumla only seems to work if it looks for an exact match. How do I change the following?

=Lookup_concat(D2&"*",'Table1'!B2:B7,'Table1'!C2:C8)

What am i doing wrong? The formula is returning nothing each time, though not getting any error??

Thanks in advance...

Additional question on this: the formula also does not seem to allow me to use named ranges vs selecting the range each time. Is there a way to update the formula to allow for named ranges?

Thanks...

Hi Oscar,

you are unbelievable! THANK YOU SO MUCH for all the answers!

[...] Chrisa asks: [...]

Hi Oscar.. Is there any way to use VLOOKUP for multiple criteria and Ido not want to use CVS... thanks in advance...

Kamran Mumtaz,

I read your question:

https://www.mrexcel.com/forum/excel-questions/682187-sumifs-unique-multiple-search.html#post3379273

This is the post you are looking for:

https://www.get-digital-help.com/2009/01/14/automatically-filter-unique-row-records-from-multiple-columns/

Is there any way to use VLOOKUP for multiple criteria and I do not want to use CVSI assume you don´t want to use CSE? (Ctrl + Shft + Enter) No, not to my knowledge.

Why did not you reply if you saw the question on Mrexcel board...? Many thanks for your help...

This is the formula given by Aladin Akyurek without (CSE)...

=INDEX(Sheet3!$B$2:$B$65,

MATCH(1,INDEX((Sheet3!$C$2:$C$65=E$1)*

(Sheet3!$A$2:$A$65=$A3),0,1),0))

Kamran Mumtaz,

Why did not you reply if you saw the question on Mrexcel board...?A trackback is created when someone links to my website. That´s how I discovered your thread.

This is the formula given by Aladin Akyurek without (CSE)...That formula is so interesting that I made this post:

No more array formulas?

Hi Oscar I have a list of numbers like

923005054609

913005054609

923005054609

933005054609

923005054609

993005054609

953005054609

923005054609

923005054609

993005054609

923005054609

973005054609

923005054609

923005054609

I do not want those numbers which starts 92... hope I am making sense...

Thanks in advance

Kamran Mumtaz,

Array formula in cell C4:

=INDEX($A$1:$A$14, SMALL(IF(LEFT($A$1:$A$14, 2)*1=$D$1, MATCH(ROW($A$1:$A$14), ROW($A$1:$A$14)), ""),ROW(A1)))

Formula in cell D4:

=INDEX($A$1:$A$14, SMALL(INDEX((LEFT($A$1:$A$14, 2)*1=$D$1)*(MATCH(ROW($A$1:$A$14), ROW($A$1:$A$14)))+((LEFT($A$1:$A$14, 2)*1)<>$D$1)*1048577, 0, 0), ROW(A1)))

Get the Excel file

Kamran-Mumtaz.xlsx

HI Oscar thanks for the formula but I want the numbers which do not start from 92...

Hey I made a little change in the formula and got the desired result

=IFERROR(INDEX($A$1:$A$14,SMALL(IF(LEFT($A$1:$A$14,2)*1$D$1,MATCH(ROW($A$1:$A$14),ROW($A$1:$A$14)),""),ROW(A1))),"")

Thanks a lot man... :)

Kamran Mumtaz,

I am sorry!

=INDEX($A$1:$A$14, SMALL(IF(LEFT($A$1:$A$14, 2)*1<>$D$1, MATCH(ROW($A$1:$A$14), ROW($A$1:$A$14)), ""),ROW(A1)))

[...] Mumtaz asked: Is there any way to use VLOOKUP for multiple criteria and I do not want to use [...]

I love this function, but know very little about VBA. Can anyone suggest a way to tweak the code a bit so that the return results are delimited with a semicolon and a space, rather than just a space?

Thanks!

Elizabeth,

Hello Oscar,

thanks for your code , i use it for a file for same searching values and it Work fine.

all the searched data are numbers :

56|55|40|63|....

for exameple i only wana one value that is : < or = a value of an other cell ( 57) in this case i only get : 56 .

could you please give me an edit code.

thanks in advance

Hey Oscar,

This function looks like it's going to do exactly what I need it to do, however when I use it I get in my list I get #VALUE. I believe it's because the returned values are multiple email addresses ([email protected]). Is there anyway this would work with email addresses?

Joe,

This function looks like it's going to do exactly what I need it to do, however when I use it I get in my list I get #VALUE.I am not sure whats wrong, maybe you don´t use absolute cell references in the function?

I believe it's because the returned values are multiple email addresses ([email protected]). Is there anyway this would work with email addresses?I am sure it works with email adresses and duplicate email adresses.

Oscar et al., thank you for this on-going forum. It has been incredibly helpful! I have (what I hope to be) a simple question. I modified one of the posted UDFs so that the multiple outputs (in this case, character strings) are displayed in a single cell, with each character string led by a bullet and followed by a hard return (i.e., ALT-Enter). I'm using the following code:

Function LOOKUP_CONCAT(Search_string As String, _

Search_in_col As Range, Return_val_col As Range)

Dim i As Long

Dim result As String

For i = 1 To Search_in_col.Count

If Search_in_col.Cells(i, 1) = Search_string Then

result = result & "• " & Return_val_col.Cells(i, 1).Value & vbLf

End If

Next

result = Left(result, Len(result) - 1)

LOOKUP_CONCAT = Trim(result)

End Function

The problem is that if the originating cell is empty, a bullet still appears. Is there a way I can modify the above code to eliminate the bullets for empty cells?

Thanks in advance for help!

Amanda,

try this:

Oscar,

Thank you for your quick response! The above code is sooo close... Instead of bullets, the blank cells now report "#VALUE!". Preferably, the blank cells would just be empty, but perhaps I can play around with the formula a bit.

All the best,

Amanda

Amanda,

Just in case I can save someone else a bit of time:

I used an IF function in combination with IFERROR to force Excel to report blank cells. For example:

IF((IFERROR((LOOKUP_CONCAT(A30,Database!A29:A617,Database!O29:O617)),"None"))="None","",(LOOKUP_CONCAT(A30,Database!A29:A617,Database!O29:O617)))

Hope that helps!

Thanks again!

Amanda

Hi Oscar. Thank you so much for sharing your extensive knowledge with us. I have a question. I am using that function that you gave for adding the values of the cells that I lookup .... =SUMPRODUCT((I5=C4:C32)*D4:D32)(Combined with the vba).... But I also have a need to find the average of those cells. Do you have a formula for that?

Thanks, Carla

Carla,

I don´t understand, can you explain in greater detail?

Hi Oscar,

This formula seems to work down a column, but I can't get it to work across rows. How would you amend the basic formula at the top so that it worked to compare 2 rows?

Thank you for sharing your knowledge. This is extremely helpful.

Eric,

I am not sure I understand.

Is this what you are looking for?

Hi Oscar,

I have a big excel file (around 22000 rows and 20 columns). Below I have tried to represent it in simplified way. Left hand side is my raw data and Right hand side is my desired output. If you can help me do this using functions (no vba code) that would be great. Please note all data is text.

I tried to upload the image but, does not look like it worked. Let me know how this can be resolved.

Nilesh,

use this contact form:

https://www.get-digital-help.com/excel-consulting/

Thanks Oscar.. I made a similar code to make it work like vlookup

Function SingleCellExtract(Lookupvalue As String, LookupRange As Range, ColumnNumber As Integer)

Dim i As Long

Dim Result As String

For i = 1 To LookupRange.Columns(1).Cells.Count

If LookupRange.Cells(i, 1) = Lookupvalue Then

Result = Result & " " & LookupRange.Cells(i, ColumnNumber) & ","

End If

Next i

SingleCellExtract = Left(Result, Len(Result) - 1)

End Function

Thanks for the cues I got from here

Sumit Bansal,

thanks for sharing!

Hi Oscar,

This has been a great help to me. I'm trying to get it to do one thing that I can't figure out though. For my application, almost all the lookup values are "1". I do however have a few instances where the lookup value could be 2 or 3. Is it possible to to use a range, e.g. 1-5 for my lookup value? Thank you.

Will,

Get the Excel *.xls file

https://www.get-digital-help.com/wp-content/uploads/2010/12/excel-vba-return-multiple-answers-into-one-cell-using-a-search-range1.xls

Oscar,

its really great and helpful function will save lots of my time... Thanks

Had an query, i want to use this function within my macro by calling it, How can i do define 'Search_string', 'Search_in_col', 'Return_val_col' as an input and run this function cell by cell?

Thanks again...

Got it no need to reply... thank-you... thank-you very much.. god Bless u.

Oscar,

I love the code but I actually need to return multiple values meeting multiple criteria. (I think this is what Jen was looking for)

E.g.

If columnA=X AND columnB=Y then return columnC values concatenated into single cell.

Thanks

Still unclaer as to how I would achieve this.... if anyone could enlighten me I would be extremely grateful!

This is what I have at the moment

But I need an additional logical test in there...

E.g. If columnA=X AND columnB=Y then return columnC values concatenated into single cell.

Thanks

Adam,

try this:

Get the Excel *.xlsm file

excel-vba-return-multiple-answers-into-one-cell-v3.xlsm

Amazing! Thank you!

[…] are some near solutions that I found but they consolidate the column data and not the row data. https://www.get-digital-help.com/2010/12/20/excel-udf-lookup-and-return-multiple-values-concatenated-… https://www.ozgrid.com/forum/showthread.php?t=94895&p=445111#post445111 […]

Works great !!!

Just what i was looking for. Clean and simple.

Mike,

Thanks!

I cannot get the UDF to work properly within my file for the life of me. I need the values to populate with the project name on a project timeline chart based off the project schedule. Similar to the post on May 25, 2012 but it does not work in my sheet. It is not recognizing the date range and multiple values.

Here is what I am trying to do:

start date col B; project name col C;

timeline chart

beginning date col G; end date col H

I need the project names which will populate col I based off the start date of the project. Multiple dates should be concatenated to the proper month range in col I

Basically, if i have three projects starting on any date in January the project names should populate for that month in col I.

Here is the formula I used: =Lookup_concat(B3,$G$3:$G$28,$H$3:$H$28,$C$3:$C$28)

Here is the UDF code:

HELP!!!!! Thanks in advance....

My Column E contains comments on each row (E2 has comments/text, E3, has comments, text). I also have a list of available keywords (O2:O2330). In H2, I want the formula to look at E2 and return each keyword (O2:O2330) contained in the text field (e.g., E2), ideally with comma separation.

Currently, I am using the following formula, but it only returns one of the keywords and not all the keywords

=LOOKUP(1E+100,SEARCH(O2:O2330,$E2),(O2:O2330))

What formula do I need to check all the cells in Column E and bring back all the keywords from each cell?

I found this via google, and tried copying the vba code into my excel 2010 spreadsheet - BUT unfortunately, getting the "#NUM!" error. I modified and changed "," with";" without success. Is there anything wrong I could be doing?

chander,

Did you paste the code into a module?

1. Press with left mouse button on Alt + F11

2. Press with left mouse button on "Insert" on the menu

3. Press with left mouse button on "Module"

4. Paste the code into the module

Firstly - thank yous so much for this UDF - it is almost exactly what I needed.

I'm new to using VB and have tried adding both your duplicate and comma samples above but this seems to be confusing the calculation.

What do I need to do to be able to both ignore duplicates and add a comma between each value?

Kind regards

Amber Dixon

VAChampion

Amber,

What do I need to do to be able to both ignore duplicates and add a comma between each value?

See Matt's comment:

https://www.get-digital-help.com/2010/12/20/excel-udf-lookup-and-return-multiple-values-concatenated-into-one-cell/#comment-40011

and Vicki's comment:

https://www.get-digital-help.com/2010/12/20/excel-udf-lookup-and-return-multiple-values-concatenated-into-one-cell/#comment-42471

Oh also.

The original lookup value I have sometimes appears in a cell with other numbers and it doesn't seem to be picking up these particular options when concatenating together. Is there any way for these others to be picked up as well?

In order to do this in one of the other cells I had to add asterix's etc ("*"&B96&"*") to make it work - assuming this works the same how would I add this to VB?

Kind regards

Amber Dixon

VAChampion

Amber,

The original lookup value I have sometimes appears in a cell with other numbers and it doesn't seem to be picking up these particular options when concatenating together. Is there any way for these others to be picked up as well?In order to do this in one of the other cells I had to add asterix's etc ("*"&B96&"*") to make it work - assuming this works the same how would I add this to VB?

Try the following udf:

Get the Excel *.xlsm file

excel-vba-return-multiple-unique-values-into-one-cell-wildcard-search.xlsm

@Amber,

You may have missed my earlier message as it is buried in the slew of responses this thread has gotten, but I posted a link to a mini-blog article I wrote that was derived from this thread which will allow you to control all the things you mentions. Here is the link to my article...

https://www.excelfox.com/forum/f22/lookup-value-and-concatenate-all-found-results-345/

Read the accompanying text as it will tell you everything you need to know, but just to emphasize... make sure you set the Delimiter argument to a comma, the MatchWhole argument to False and the UniqueOnly argument to True along with any other arguments.

Hi Oscar, great UDF. Is there a similar code to search in rows and return the values to one cell?

Hi Oscar, great UDF. Is there a similar code to search in rows and return the values to one cell

Hi Oscar,

great UDF. Is there a similar code to searches rows?

Function LOOKUP_CONCAT(Search_string As String, _

Search_in_col As Range, Return_val_col As Range)

Dim i As Long

Dim result As String

For i = 1 To Search_in_col.Count

If Search_in_col.Cells(i, 1) = Search_string And Return_val_col.Cells(i, 1).Value "" Then

result = result & "• " & Return_val_col.Cells(i, 1).Value & vbLf

End If

Next

result = Left(result, Len(result) - 1)

LOOKUP_CONCAT = Trim(result)

End Function

Hi thanks for this above code. But I need to return concatenate using multiple criteria rather than single criteria.

Oscar - This was extremely helpful - many thanks

Danny,

thank you for commenting.

Can't say thank you enough.

Tom,

I am happy you find it useful.

Hi Oscar,

Thank you so much for this code, it's amazing! I have a fairly large table that I want to use this on, but keep getting a #VALUE error. I've played around with the inputs and noticed that I start getting the error at certain range sizes. For example, if the range is only 100 rows (say E3:E103) it would work just fine, but the moment it hits a random number (and this number seems to vary by the spreadsheet I use it in), usually anything over 500 rows, then I get a #VALUE error. Any thoughts? The values it's returning are quite wordy since they are security roles to a system. I'm trying to think if there is a character limit I'm hitting somewhere? Or maybe there is a row limit? I've tried this with your original code, and with my modified code (below). In your original spreadsheet I expanded your sample data to be more than 2000 rows and it worked, but with larger Excel files and larger tables it seems to start getting wonky.

Alexmp,

I've played around with the inputs and noticed that I start getting the error at certain range sizes.For example, if the range is only 100 rows (say E3:E103) it would work just fine, but the moment it hits a random number (and this number seems to vary by the spreadsheet I use it in), usually anything over 500 rows, then I get a #VALUE error. Any thoughts?

The values it's returning are quite wordy since they are security roles to a system. I'm trying to think if there is a character limit I'm hitting somewhere? Or maybe there is a row limit?How wordy?

Excel 2007, 2010 and 2013 have a total number of characters that a cell can contain. 32,767 characters.

32,767 characters

They are wordy, but not that wordy. I can't seem to figure out what the problem might be. It really shouldn't matter because the string it returns won't be that long. Even if it might be for 1 or two of the cells that it would return values for, it wouldn't do it for all of them, so theoretically the ones that have smaller values should still show up. However, when I increase the range size it gives me the #VALUE error for all of the cells I use the function in, even if the value it's supposed to return is blank.

Any thoughts on what to look for?

HI Oscar,

ALT + ENTER Code resulting un-necessary space, pls can you tell me how I can remove that space.

Now

speedometer

tachometer

odometer

odometer

fuel gauge

& Require

speedometer

tachometer

odometer

odometer

fuel gauge

Hi Oscar,

Glad to find your code of "Lookup and return multiple values concatenated into one cell - ignore duplicates".

It is very close to what I need for my workbook. I have to lookup the values from several worksheets and remove any duplicates from the results.

Is there a way to do this?

Thanks in advance!

Hi Oscar,

Very beautiful UDF. It helped me a lot.

Is it possible to add sumifs into this UDF.

Example:

Column A is having Names, Column B is having Location and Column C is having Total Amount.

Result by using the UDF am getting desired result.

For each Name, number of locations is dynamic, for some criteria there could be 1 location for some it could be 3 and so on.

In column D, I need to get sum of Amount based on each resultant value from the LookUpContact result.

Please help me

Thanks,

Kumuda

Oscar,

Thank you so much for sharing this! It was exactly what I needed up until I needed to retrieve multiple values based on criteria. I just don't know how to accomplish this.

Here are my data columns:

Supplier Buyer Buyer Need

I have a long list of Suppliers who are meeting with Buyers on specific Buyer Needs. Some Suppliers are meeting on 1-5 different Buyer Needs. I need Column C (Buyer Need) to return a concatenated list with new lines for each need. However, I only want the needs of Buyer 1 related to Supplier 1.

I have this:

Supplier 1 Buyer 1 Need 1

Supplier 1 Buyer 1 Need 2

Supplier 1 Buyer 1 Need 3

Supplier 1 Buyer 2 Need 2

Supplier 1 Buyer 2 Need 4

Supplier 2 Buyer 1 Need 4

Supplier 2 Buyer 1 Need 5

Supplier 3 Buyer 2 Need 6

Supplier 3 Buyer 2 Need 7

This is what I'm hoping to get:

Supplier 1 Buyer 1 Need 1

Need 2

Need 3

------------------------

Supplier 1 Buyer 2 Need 2

Need 4

------------------------

Supplier 2 Buyer 1 Need 4

Need 5

------------------------

Supplier 3 Buyer 2 Need 6

Need 7

-----------------------

Thank you!

Sorry, the spacing is off... the Need 1, Need 2, Need 3, etc. are in the same column in a single cell.

Just like to thank you for this solution which i was badly looking for and actually using it today

Oscar, this formula is the BEST THING EVER! One question though. If I only need to return values that start with a certain letter, how can I integrate that into the function?

Kaley,

VBA Code

Get the Excel *.xlsm file

excel-vba-return-multiple-answers-into-one-cell-starting-with-a-specific-character.xlsm

Hi Oscar,

Thank you very much for sharing the formula, I am so lucky to bump to this website as this is the formula that I exactly need.

However, I have problem on the excel report processing upon enabling the macro. is there any limitation in number of rows in database?

Hi Oscar, I love your website!

Is it possible to vlookup a single cell from another single cell containing multiple items separating by a comma? For instance, I'd like to know what color the numbers 11,2,33 are...

Number Color

1,11 green

2,22 orange

3,33 blue

Hi Oscar,

I don't have any experience in UDF/macro/vba. I copied vba code (lookup and return multiple values in one cell) and it works well and solve my problem.

However, I face another problem; the excel file take very long processing time to change values related to the UDF code as I saved the file in Macro enable worksheet (Microsoft Excel 2013 - file format .xlsm). if I saved in xlsx format, the processing time is fine (the file size is only 800kb), but the function (UDF) is not working at all.

Could you please advice me on how to resolve this problem? I did follow your steps (copy and paste the vba code)...

Thank you very much for your kind help...

Hi Oscar,

Thanks for the code - FANTASTIC!

Is there a way this function can be applied to concatenate results based on two different criteria?

Eg. Lookup A1 AND B1 THEN Concatenate results in same cell on separate lines...

Thoughts?

Thanks!

Miranda

[…] but you can either apply the same methodology as above but add more steps or check out adding a UDF here […]

"Cormac says:

April 25, 2014 at 11:16 am

Hi Oscar,

great UDF. Is there a similar code to searches rows?"

Like Cormac's statement above, is it possible to look up the row numbers of the cells that contain the value being looked up?

Here is an example of the function that I have:

=Lookup_concat(INDEX(Lists!$F$2:$F$140,MATCH(ROW(INVENTORY!2:2)-1,Lists!$G$2:$G$140,0)),Lists!$F$2:$F$140,Lists!$F$2:$F$140)

Here is an example of how I am thinking the function should look:

=Lookup_concat(INDEX(Lists!$F$2:$F$140,MATCH(ROW(INVENTORY!2:2)-1,Lists!$G$2:$G$140,0)),Lists!$F$2:$F$140,Row(Lists!$F$2:$F$140))

The above function gives 2,2,2,2,2,2 with the code I have. But, I want it to give 2,3,4,5,6,7 instead, which are the row numbers of the cells that contain "2" in the specified column.

Here is the code I am using:

Function Lookup_concat(Search_string As String, _

Search_in_col As Range, Return_val_col As Range)

Dim i As Long

Dim Result As String

For i = 1 To Search_in_col.Count

If Search_in_col.Cells(i, 1) = Search_string Then

Result = Result & ", " & Return_val_col.Cells(i, 1).Value

End If

Next

Result = Mid(Result, 2, Len(Trim(Result)) - 1)

Lookup_concat = Trim(Result)

End Function

Thanks for any help in advance.

Don

Don Petry,

See this file:

excel-vba-return-multiple-answers-into-one-cell_don_petry.xls

Thanks. This works just fine.

Hi,

What if I want to apply this to rows instead of columns, that is (Look_up_value, Search_in_row, Concatenate_values_in_row)? Is that possible?

thanks

Hi Oscar,

I am looking to return multiple values concatenated into one cell between a specified date range.... I have gone through the thread above but I can't find anything relevant. I wonder do you have any formula that can help me?

Thanks

Cormac

Hello,

I am trying to use your VB code on a list that has hidden rows. However it is returning the hidden rows.

Is it possible to only return data that is visible?

Why do you need to use Trim() at all in the VBA code here? Also, why is Len() - 1 required?

The code works fine without it...?

Oscar,

This is a great post. My question echoes a few others that are having difficulty concatenating dates. My search value is a number, but I want to return multiple, matching date ranges. Right now the formula returns #NAME?. I have tried changing the format of the dates to general and number, but it does not work. I know others have had issues with dates, and I was wondering if there is a workaround for this...

Janine,

Check out this workbook:

excel-vba-return-multiple-dates-into-one-cell.xlsm

Hello,

Is there a way to return values that fall within a specific date range?

I am trying to attach collection notes made through out the month onto a spreadsheet with customer names and phone numbers.

I would like the "notes" column to have all of the notes for the month into one cell.

I have a spreadsheet where the notes are listed in table form. I would like to search the table based on the customer number and return the notes based on a date range. I tried to sort the table to only the current month, but it returned the hidden rows. It tried to put in a date range, but only received an error message.

Thank you so very much for providing this code, and also for helping us all out.

Sinjin

Thank you Oscar for your effective solution. I would need the result based on multiple criteria. As per following chart, I need a person wise client names with Amount in one cell based on the date.

Sample Data

WKStartDt WKEndDt SalesPerson Client Amt

25-10-14 31-10-14 Person-1 Client-A 10

25-10-14 31-10-14 Person-1 Client-B 20

1-11-14 7-11-14 Person-1 Client-C 30

1-11-14 7-11-14 Person-1 Client-D 40

Sample Result

SalesPerson DATE ClientName

Person-1 27-10-2014 Client-A(10), Client-B(20)

Oscar,

Thank you so much. Is there a way to concatenate adjacent cells based upon their value (such as anything greater than 0)? I only want to concatenate the text in columns NALC and GROUP if the qty is greater than 0.

The below should assist in what I am trying to achieve.

NALC GROUP QTY

N289 S 100

N290 D 0

N291 D 75

GROUPS S,D

NALCS N289, N291

Thanks for the assistance.

Mike

Hi Oscar,

Great UDF. I'm trying to change the colour of the (result) font to match the search_in_col.interior.color but i'm unable to get it to work.

Can anyone assist.

Here's what i have....i get a syntax error.

PS my function is called Actual_concat because i'm doing a compare of lookup v's acutal into the same cell, therefore need to change the Actual result font color.

result = (result).Font.Color = Search_in_col.Interior.Color

Actual_concat = Trim(result)

Thanks Tammy

Tammyw,

I don´t think you can do that with a user defined function.

Thanks Oscar.

Hi All,

I need your help to build a macro.

I attached the macro enabled sheet(for your reference)

my need(criteria)

Description

Worksheet can contain "“TICKER”", "“SEDOL”", "“ISIN”"

I need only 2 (“TICKER” and “SEDOL”, if “TICKER” is absence “SEDOL” and “ISIN”, if “SEDOL” is not available “TICKER” and “ISIN”)

1. “TICKER” and “SEDOL”

2. “SEDOL” and “ISIN”

3. “TICKER” and “ISIN”

1. If worksheet contains the "“TICKER”" it's have to change as a "Identifier 1" and have to add a blank column (right side)

2. if "“TICKER”" is not available search for "“SEDOL”" and have to change as a “Identifier 1” and have to add a blank column (right side)

Like wise 2 are prepared

1. “TICKER”(identifier 1) and “SEDOL” (Identifier 2)

2. “SEDOL” (Identifier 1) and “ISIN” (Identifier 2)

3. “TICKER” (Identifier 1) and “ISIN” (Identifier 2)

If 3 are available only “TICKER” and “SEDOL” have to change no need of “ISIN”

Thanks,

Narendra

Hi Oscar,

I need your help to build a macro.

I attached the macro enabled sheet(for your reference)

my need(criteria)

Description

Worksheet can contain "“TICKER”", "“SEDOL”", "“ISIN”"

I need only 2 (“TICKER” and “SEDOL”, if “TICKER” is absence “SEDOL” and “ISIN”, if “SEDOL” is not available “TICKER” and “ISIN”)

1. “TICKER” and “SEDOL”

2. “SEDOL” and “ISIN”

3. “TICKER” and “ISIN”

1. If worksheet contains the "“TICKER”" it's have to replace with "Identifier 1" and have to add a blank column (right side)

2. if "“TICKER”" is not available search for "“SEDOL”" and have to replace with “Identifier 1” and have to add a blank column (right side)

3. if Ticker is available it will replace with "Identifier 1", then have to search for "SEDOL" if it's available it's have to replace with "Identifier 2"

1. “TICKER”(identifier 1) and “SEDOL” (Identifier 2)

2. “SEDOL” (Identifier 1) and “ISIN” (Identifier 2)

3. “TICKER” (Identifier 1) and “ISIN” (Identifier 2)

If 3 are available only “TICKER” and “SEDOL” have to replace with "Identifier 1" and "Identifier 2" accordingly no need of “ISIN”

Thanks,

Narendra

Hi

Thanks for the help with this UDF.

Sorry, I did also have a question too....but my browser seems to have crashed.

Similar to TammyW, wondering if there is ANY way to match original font. If not, not a HUGE deal.

The other item is related to what others have inquired about; using the multiple criteria UDF where instead of matching exactly, looking to return values that are ">0". Cn this be achieved with nesting a formula along with the UDF? I have tried several permutations to no avail.

Any insights, advice, wisdom would be greatly appreciated.

Thanks again for contributing to the greater good of ALL excel junkies!

This post may be way too old to be asking a question of but wanted to try anyway as I am desperate to get this to work...

Maybe what I am trying to do is impossible but..

Column A = every day of the year

Column B = Event Name

Column C = Event Start Date

Column D E= Event End Date

Column E = (Formula column) each cell needs to show what events are occurring on the corresponding day of the year (column A) and display all of the event names that apply.

Wish I could upload a file but I will try this:

A B C D E

Day of Year Event Name Event start date Event end date Event occurring on the corresponding day of the year (A)

4/1/2015 Event 1 3/30/2015 4/5/2015 Event 1, Event 2

4/2/2015 Event 2 4/1/2015 4/5/2015 Event 1, Event 2, Event 4

4/3/2015 Event 3 4/5/2015 4/8/2015 Event 1, Event 2, Event 4

4/4/2015 Event 4 4/2/2015 4/4/2015 Event 1, Event 2, Event 4

4/5/2015 Event 5 4/6/2015 4/10/2015 Event 1, Event 2, Event 3

4/6/2015 Event 6 5/1/2015 6/1/2015 Event 3, Event 5

Hi Oscar,

I am also trying to search a row as one of the commenters did and I tried your method but it didn't work.

with x,y and z being inputboxes if columna=x and columnb=y and column =z display column d is what I want basically

I tried changing your this code from 2014

As all the others, I found this UDF very useful. I am using this version of your code:

Function Lookup_concat(Search_string As String, _

Search_in_col As Range, Return_val_col As Range)

Dim i As Long

Dim result As String

For i = 1 To Search_in_col.Count

If Search_in_col.Cells(i, 1) = Search_string Then

result = result & " " & Return_val_col.Cells(i, 1).Value & Chr(10)

End If

Next

Lookup_concat = Trim(result)

End Function

One issue I have is I need to remove the blank cells from being included in the results. I only want those cells that have data to be concatenated into one cell. Is there a line I need to add to this VBA code that can do that? Thanks!

Hi Oscar - This did exactly what I needed it to but it keeps crashing my excel. Is there anything I can do to prevent this? Could I set it up so it only resfreshes when a button is pressed?

Hi Oscar,

This code is amazing, saves me a lot of time.

one question i have is...

I use excel 2010 and my look up is done in about 350 lines of data. it takes about 7 seconds to return one result...

Is this normal?

Meaning that it would take me about 40 minutes for the entire range.

Regards

Eugene

Hello, I need a UDF for concatenating rows. for example as below

ROw 1 IDs 10075 10076 10077 10078 9295 1701

Row 2 ABC TRUE TRUE TRUE TRUE FALSE FALSE

I want concatenate all the True's i.e like _10075_10076_10077_10078.

Please help me.

Hi there Oskar,

This is great, I am having a particular issue in that I would like to enter each vehicle application (in the vehicle application sheet) as a singular row, with the various part #'s listed in the one cell and sperated with commas. Eg. speedometer 1,2,3 rather than tree rows for speedometer. Any help with this would be amazing!

Regards,

Steffan

Hi Oscar,

These codes are fantastic. I've read through quite a few inquiries and didn't get to one similar to mine. So I apologize if this is a repeat inquiry.

Your original UDF code is almost perfect for me. However I have 3 columns to look up, and then combine multiple cells (text) from another column. I've got a date, project code, and a task number. I also have multiple descriptions of work performed that need to be combined according to the date, project code and task number. Do you have another UDF for this?

Thanks so much for your work. Excel rocks.

Regards,

Claudia

Hi, I have a problem I'm stuck with and I'm hoping for a formula rather than VBA. I have two columns.

5560325127 316087

5560325127 316088

5560325127 311410

5560325127 323277

5560325127 329040

What I want to do is search the list in column A and I wasn't to return all the matches in column B into column C like 326087,326088,311410.....etc.

Like a vlookup but return all the matches separated by commas?

Laurence Stachow,

What I want to do is search the list in column A and I wasn't to return all the matches in column B into column C like 326087,326088,311410.....etc.Like a vlookup but return all the matches separated by commas?

You can't return all matches separated by a comma using a formula, you need a user defined function to do this. Perhaps you can modify the udf in the following post:

https://www.get-digital-help.com/2009/10/25/how-to-return-multiple-values-using-vlookup-in-excel/#vba

Function Lookup_concat(Search_string As String, _

Search_in_col As Range, Return_val_col As Range)

Dim i As Long, result As String

Dim Search_strings, Value As Variant

Search_strings = Split(Search_string, ";")

For Each Value In Search_strings

For i = 1 To Search_in_col.Count

If Search_in_col.Cells(i, 1) = Value Then

result = result & " " & Return_val_col.Cells(i, 1).Value

End If

Next i

Next Value

Lookup_concat = Trim(result)

End Function

Im using this udf...it is working well when looking up text, but with numbers it is not returning a value. I'm new to vba and not sure what is wrong.

Hi Oscar,

Could you please tweak the below macro to get the intended results.

This macro is working fine but, Macro pasting the all body data in to Singe cell. Actually my mail body had tabular data.

'Option Explicit

Sub Transfer_Outlook_Mail_To_Excel()

'Add Tools->References->"Microsoft Outlook nn.n Object Library"

'nn.n varies as per our Outlook Installation

Dim Folder As Outlook.MAPIFolder

Dim sFolders As Outlook.MAPIFolder

Dim iRow As Integer, oRow As Integer

Dim MailBoxName As String, Pst_Folder_Name As String

'Mailbox or PST Main Folder Name (As how it is displayed in your Outlook Session)

MailBoxName = "Narendra"

'Mailbox Folder or PST Folder Name (As how it is displayed in your Outlook Session)

'Pst_Folder_Name = "inbox" 'Sample "Inbox" or "Sent Items"

Pst_Folder_Name = "Report 46"

'To directly a Folder at a high level

'Set Folder = Outlook.Session.Folders(MailBoxName).Folders(Pst_Folder_Name)

'To access a main folder or a subfolder (level-1)

For Each Folder In Outlook.Session.Folders(MailBoxName).Folders

If VBA.UCase(Folder.Name) = VBA.UCase(Pst_Folder_Name) Then GoTo Label_Folder_Found

For Each sFolders In Folder.Folders

If VBA.UCase(sFolders.Name) = VBA.UCase(Pst_Folder_Name) Then

Set Folder = sFolders

GoTo Label_Folder_Found

End If

Next sFolders

Next Folder

Label_Folder_Found:

If Folder.Name = "" Then

MsgBox "Invalid Data in Input"

GoTo End_Lbl1:

End If

'Read Through each Mail and export the details to Excel for Email Archival

ThisWorkbook.Sheets(1).Activate

Folder.Items.Sort "Received"

'Insert Column Headers

ThisWorkbook.Sheets(1).Cells(1, 1) = "Sender"

ThisWorkbook.Sheets(1).Cells(1, 2) = "Subject"

ThisWorkbook.Sheets(1).Cells(1, 3) = "Date"

ThisWorkbook.Sheets(1).Cells(1, 4) = "Size"

ThisWorkbook.Sheets(1).Cells(1, 5) = "EmailID"

ThisWorkbook.Sheets(1).Cells(1, 6) = "Body"

'Export eMail Data from PST Folder

oRow = 1

For iRow = 1 To Folder.Items.Count

'If condition to import mails received in last 60 days

'To import all emails, comment or remove this IF condition

'If VBA.DateValue(VBA.Now) - VBA.DateValue(Folder.Items.Item(iRow).ReceivedTime) <= 60 Then

oRow = oRow + 1

'Sh.Cells.Copy

ThisWorkbook.Sheets(1).Cells(oRow, 1).Select

ThisWorkbook.Sheets(1).Cells(oRow, 1) = Folder.Items.Item(iRow).SenderName

ThisWorkbook.Sheets(1).Cells(oRow, 2) = Folder.Items.Item(iRow).Subject

ThisWorkbook.Sheets(1).Cells(oRow, 3) = Folder.Items.Item(iRow).ReceivedTime

ThisWorkbook.Sheets(1).Cells(oRow, 4) = Folder.Items.Item(iRow).Size

ThisWorkbook.Sheets(1).Cells(oRow, 5) = Folder.Items.Item(iRow).SenderEmailAddress

ThisWorkbook.Sheets(1).Cells(oRow, 6) = Folder.Items.Item(iRow).Body

'Range(“A1”).PasteSpecial (xlPasteValues)

'End If

Next iRow

MsgBox "Outlook Mails Extracted to Excel"

Set Folder = Nothing

Set sFolders = Nothing

End_Lbl1:

End Sub

Hello Oscar:

I've used your udf and after a few minor tweaks I've found it to be very helpful for my needs. My only problem is that the introduction of this formula has severely bogged down the processing time of my workbook.

Curious, in all of your tweaking of this udf based off of various questions and requests, have you found any good optimization techniques when dealing with large amounts of data?

For instance, I have 60k+ data points which are my individual search strings, and the Search_in_col and Return_val_col ranges have 10k+ data points. Is there a way to optimize this code such that the calculating time is significantly reduced?

Your help would be much appreciated!

Good afternoon!

I am trying to use this to save some manual time for a staff member. When using this for our needs, we may have 3-5 results in the cell. Sometimes we have a large amount.

Is there a way to have it cut off the results after a certain length (or number in the array) and maybe put in something like "Plus 30 More"?

Here's an example:

Let's have a cutoff of 3 results.

A cell that will return 3 or less results will display all of them: apple, banana, grape.

A cell that will return 4 or more results will display the first 3 and then remaining text: apple, banana, grape, plus 2 more.

Hi Oscar

Great solution.

Is it possible to do a similar lookup function on a cell that has multiple values?

As background I work at a university and have a list of subjects and the courses they belong to. Some subjects belong to multiple courses.

Our timetable has some subjects that are co-taught in the same space (i.e. subjects A,B and C are taught together.)

The way this is displayed is A+B+C.

What I need to know is all the courses subjects A, B and C belong to.

The above VBA works when there is a absolute match but not when there are multiple values in the lookup cell.

Thanks

Hi Tom,

Yes, it is possible. Try this:

Hi Oscar

Thanks for the quick reply.

That new code still only returns values when there is a single subject in the cell being looked up. As soon as any other character is in the cell the lookup returns a blank.

Unfortunately I have a lot of these co-taught subjects and they are of varying length so I would rather avoid having to delimit them into separate columns.

Thanks

Tom

I think I got it, the following custom function splits your search string using delimiting character +

Tom, are you looking for something like this maybe...

Oscar and Rick

That's exactly it! Thanks very much for your help.

all I want to say is THANK YOU!!!

I've been looking for this solution for almost a year. I didn't even consider UDF. Works perfectly!!

THANK YOU!!

1

Function Lookup_concat(Search_string As String, _

2

Search_in_col As Range, Return_val_col As Range)

3

Dim i As Long, j As Long

4

Dim result As String

5

Dim srchArr() As String

6

srchArr = Split(Search_string, "+")

7

For i = 1 To Search_in_col.Count

8

For j = LBound(srchArr) To UBound(srchArr)

9

If Search_in_col.Cells(i, 1) = srchArr(j) Then

10

result = result & " " & Return_val_col.Cells(i, 1).Value

11

End If

12

Next j

13

Next

14

Lookup_concat = Trim(result)

15

End Function

Dave

I am happy you find it useful.

Hi Oscar,

just used your tips above on a problem I had in a similar case where I needed to return multiple values in one cell. It worked out so far.

Thanks for the hints!

However, I also need to have a line break after each cell's content.

As I'm not really familiar with VBA (and a little proud of me that I made it so far) I was wondering if it is possible to to get this included?

I found some hints on the internet such as " & _

"

but didn't got it running.

Can you help me with that?

Best regards from Germany!

;-)

Joerg

Joerg,

[UPDATE]

See function a few comments below.

Thanks Oscar!

That is terrific - it works great!

I appreciate your help!!

All the best!

Joerg

Hi again,

one more question:

as I said before your code works great but in my case I do need to run it twice over two different tables and then check if it has identical content or not - I use CONDITIONAL FORMATTING.

While diving into your code I realized that you used TRIM already, but this works only at the last row of each result. In my case one result comes from a table that contains already all results in one cell, the other table contains the values to be collected in different cells. This one causes the additional invisible characters.

Do you know how to solve my dilemma?

I appreciate your repeated help!

Joerg

Joerg

You are right, I forgot to remove it. This is what the function should look like:

Hi Oscar, This is a great pice of work.

I try to marge two macros and do multiple inputs and matching date range. I use your examples but cant get the result.

I have 4 columns A: 2003 B:2009 C:ALFA ROMEO D:147 in column

E is search result:

=Lookup_concat(A2,'Vehicle applications'!$C$2:$C$13,B2,'Vehicle applications'!$C$2:$C$13,'Vehicle applications'!$D$2:$F$13)

in 'Vehicle aplication' tab:

A:ALFA ROMEO B:147 C:2010 D:17121

A:ALFA ROMEO B:147 C:2008 D:17121

A:ALFA ROMEO B:147 C:2007 D:17121

etc

Macro:

------------------

Option Explicit

Function Lookup_concat(Search_stringA As String, Search_in_colA As Range, _

Search_stringB As String, Search_in_colB As Range, StartDate As Range, EndDate As Range, Return_val_col As Range)

Dim i As Long

Dim result As String

For i = 1 To Search_in_colA.Count

If Search_in_colA.Cells(i, 1) = Search_stringA And _

Search_in_colB.Cells(i, 1) = Search_stringB Then

For i = 1 To StartDate.Count

If StartDate(i, 1) = SearchDate Then

result = result & " " & Return_val_col.Cells(i, 1).Value

End If

End If

End If

Next i

Lookup_concat = Trim(result)

End Function

------------------

Could you or anyone her help me with this one please.

I share my file using dropl link below:

https://d.pr/f/vFbA

Yee I fix it, right now when I look on this it does not looks very simple.

Now Is something much harder to achieve. I have duplicates value which I need to delate any suggestions?

My VBA lokks like that:

Option Explicit

Function Lookup_concat(Search_stringA As String, Search_in_colA As Range, _

Search_stringB As String, Search_in_colB As Range, _

Search_stringC As String, Search_in_colC As Range, _

Search_stringD As String, Search_in_colD As Range, Return_val_col As Range)

Dim i As Long

Dim result As String

For i = 1 To Search_in_colA.Count

If Search_in_colA.Cells(i, 1) = Search_stringA And _

Search_in_colB.Cells(i, 1) = Search_stringB And _

Search_in_colC.Cells(i, 1) >= Search_stringC Then

If Search_in_colD.Cells(i, 1) <= Search_stringD Then

result = result & " " & Return_val_col.Cells(i, 1).Value

End If

End If

Next i

Lookup_concat = Trim(result)

End Function

This is My final VBA which works Thanks for great website :

_____________________________________________

Function Lookup_concat(Search_stringA As String, Search_in_colA As Range, _

Search_stringB As String, Search_in_colB As Range, _

Search_stringC As String, Search_in_colC As Range, _

Search_stringD As String, Search_in_colD As Range, Return_val_col As Range)

Dim i As Long

Dim temp() As Variant

Dim result As String

ReDim temp(0)

For i = 1 To Search_in_colA.Count

If Search_in_colA.Cells(i, 1) = Search_stringA And _

Search_in_colB.Cells(i, 1) = Search_stringB And _

Search_in_colC.Cells(i, 1) >= Search_stringC Then

If Search_in_colD.Cells(i, 1) <= Search_stringD Then

temp(UBound(temp)) = Return_val_col.Cells(i, 1).Value

ReDim Preserve temp(UBound(temp) + 1)

End If

End If

Next

If temp(0) "" Then

ReDim Preserve temp(UBound(temp) - 1)

Unique temp

For i = LBound(temp) To UBound(temp)

result = result & ", " & temp(i)

Next i

result = Mid(result, 2, Len(Trim(result)) - 1)

Lookup_concat = Trim(result)

Else

Lookup_concat = ""

End If

End Function

Function Unique(tempArray As Variant)

Dim coll As New Collection

Dim Value As Variant

On Error Resume Next

For Each Value In tempArray

If Len(Value) > 0 Then coll.Add Value, CStr(Value)

Next Value

On Error GoTo 0

ReDim tempArray(0)

For Each Value In coll

tempArray(UBound(tempArray)) = Value

ReDim Preserve tempArray(UBound(tempArray) + 1)

Next Value

End Function

Damian,

thank you for posting your solution.

Hi Oscar, Thank you for a great code.

Now I can't figure it out how to add search if in finding columns I have cells contains numbers separate by | Pipe symbol

for example

want find number 4 =< or bigger in column where in cells we have few numbers (1|2|3|4|5|6) separate by "|"

In here I want to use some split function but not sure how.

this is my code:

I found split function on web

Split code:

Try to split it like this but something does not work

Damian

Try this:

Hi,

Thank you for the LOOKUP_CONCAT function. However, I face a performance issue - the excel freezes for a couple of seconds each time I run this function for just one row.

Is this to be expected ?

Jo,

It depends on how much data you work with?

And if you have many othe cpu intensive tasks in your workbook?

It is possible to make the LOOKUP_CONCAT function much faster.

I working on something like this to have different variables. Cable you help me? I want to get a return of value on worksheet "index prod" E1 if I match A2 left 10 characters in Worksheet "indexprod cell E2:E8. Also to get return value of worksheet "index prod" F1 if I get a match A2 left 10 characters in Worksheet "indexprod cell F2:F8.

The first lookup works fine. using this function =Lookup_concat(LEFT(A2,10),'index prod'!E2:E8,'index prod'!E1 . But I would like to combine as many as I want, example; =Lookup_concat(LEFT(A2,10),'index prod'!E2:E8,'index prod'!E1, Lookup_concat(LEFT(A2,10),'index prod'!F2:F8,'index prod'!F1))

.

Here is user defined funtion I am using.

Function Lookup_concat(Search_string As String, _

Search_in_col As Range, Return_val_col As Range) As Variant

Dim i As Long

Dim result As String

For i = 1 To Search_in_col.Count

If Search_in_col.Cells(i, 1) = Search_string Then

result = result & " " & Return_val_col.Cells.Value

End If

Next

Lookup_concat = Trim(result)

End Function

Oscar,

Thank you for your page, its been helpful, but I am now stuck with my limited Excel exposure.

I have used Lookup_concat function to extract data from Table1 - the output is empty, single value or multiple semicolon separated values. I now need to use the values in that cell to lookup in table2, concatenate those entries into one cell:

First cell = A, B, C --> using Lookup_concat from table 1

Destination cell --> using another function from table2

A

Text…..

B

Text….

C

Text…

I hope this makes sense and you can help

Shiraz

Hi Oscar, this is a great work! Thanks so much.

I was looking for a way to concatenate only the unique data instead of all that is looked up.

Hope you can help me. Thanks.

Dan Sheriff

https://www.get-digital-help.com/2010/12/20/excel-udf-lookup-and-return-multiple-values-concatenated-into-one-cell/#comment-40011

Hi I am trying to add the two user defined functions - one for the lookup_concat and the other for the ignore duplicate values, but I have a couple of questions. I tried to read the comments to see if they were answered but there so many of them!

Here they are:

1) Do I add two modules one for each VBA or do I put them in the same module?

2) Do I add the modules in the workbook that I am working on onlY?

Thanks much

T

Gigi,

You can put them in the same module. You can also group your macros in different modules if you prefer that.

Yes, but if you want to use your macros in all your open workbooks I recommend this:

https://www.get-digital-help.com/2013/12/03/add-your-personal-excel-macros-to-the-ribbon/

Oscar,

how do i combine multiple of these into one UDF?I would like one UDF for #1, #2, and #3 listed above. also, instead of selecting one cell for the value to look up i would like to select a range of cells. but the range should be dynamic with the number of rows in the range being the number in cell A1.

Hello Oscar,

I'm not knowledgeable with VBA.

Below is the function I found in the web that suits my needs, but it takes time to run it.

I don't know how to write it together with the optimizing codes though.

Function MYVLOOKUP(pValue As String, pWorkRng As Range, pIndex As Long)

'Update 20150310

Dim rng As Range

Dim xResult As String

xResult = ""

For Each rng In pWorkRng

If rng = pValue Then

xResult = xResult & " " & rng.Offset(0, pIndex - 1)

End If

Next

MYVLOOKUP = xResult

End Function

Hope you can assist.

All the best. 😊

Hi Oscar,

I tried Text join for my data. I am getting the error #NAME?

Is there a reason to show this error.

It worked when i tried a subset of data. But it didnt work when i tried with the full data.

Thank you

@Oscar and @Rick Rothstein who modified @Oscar code for more useful.

It saves a lot more time for our work!.

Phyo,

you are welcome!

Hi Oscar

I found on your blog exactly what I was looking for - but somehow it seems I am blind or unable in another way to find an explanation you mention:

https://www.get-digital-help.com/2010/12/20/excel-udf-lookup-and-return-multiple-values-concatenated-into-one-cell/#concatenate

On the very top right under the screenshot of the table with the fruits, you say

"The picture above shows an array formula in cell F3 that looks for value "Fruit" in column B and concatenates corresponding values in column C."

I do not see the corresponding array formula, just the screenshot of the result.

Now I wonder if I misunderstand something, the formula is really missing, or I just don't look at the right place.

Can you help me out?

Thanks Robert

Robert,

you are right, it is confusing. I have updated the article.

The array formula that is missing for the top image is:

=TEXTJOIN(" ", TRUE, IF(B11=B3:B8, C3:C8, ""))

Hey Oscar, this is a HUGE help. For the UDF, I am trying to combine the elimination of duplicates, with a delimiter string. I've tried a few different ways, but I'm not good with VBA and end up with extra semi colons (as my delimiter). Can you help me combine those two codes? Thanks in advance!!

Jack,

There is a forumla that you can use:

https://www.get-digital-help.com/2017/08/03/concatenate-unique-distinct-values/

To remove the extra semicolon use these lines:

Just a quick question about your lookup_concat i really like your function and id like to use it on a business project but i want to be sure that i have your permission to use it or i'll keep using my concatenate function + vlookup to concatenate multiple value or a pivot table with function filter. I'm still new to all this macros/VBA stuff.

Bertrand,

Yes, but use at your own risk. I can't be responsible for your use of the information provided on my website.

Lookup and return multiple dates concatenated into one cell.

In this particular VBA code I want to change the default date format from dd/mm/yyyy to dd-mmm-yy. How to change the format ?

I recommend you use the Format function (VBA).

https://www.techonthenet.com/excel/formulas/format_date.php

Hi Oscar, thank you very much for your informative article.

May I ask if there is a way to combine both ①return unique distinct values concatenated into one cell and ② delimiter → one UDF？

If it is possible, hope to get your VBA code for it.

Dan,

You are welcome. Please read this article:

https://www.get-digital-help.com/2017/08/03/concatenate-unique-distinct-values/

/Oscar

Hi Oscar,

Can you add a way to search multiple lookup values in one delimited cell in your "Split search string using a delimiting character and return multiple matching values concatenated into one cell" UDF? And is there an Excel only equivalent of this now?

Cris,

try this UDF:

https://www.get-digital-help.com/2010/12/20/excel-udf-lookup-and-return-multiple-values-concatenated-into-one-cell/#14

Hello!

Thank you for your response.

However, I mean a combination of split search string using a delimiting character, multiple lookup values in one cell then concatenates/textjoins results in one cell with no duplicate values and only a single delimiter in a single UDF.

Is this possible with the one you linked above? I tried but is not giving me results.

Have a great day!

{=INDEX([book_1.xlsx]Sheet2!$C:$C,MATCH(1,(C1=[Roshan_Work_book_1.xlsx]Sheet2!$B:$B)*(A2=[book_1.xlsx]Sheet2!$A:$A),0))}

Is there any option to copy this formula down the column.

I get #N/A when I try to drag down and fill the formula.

Hi Oscar,

This is what I have been looking for. I entered the VBA and entered the formula but when I use it I get a Compile error: Syntax Error on the VBA. I press with left mouse button on OK and this is highlighted:

Function Lookup_concat(Search_string As String, _

Search_in_col As Range, Return_val_col As Range)

with a yellow arrow pointing to the second line.

Can you help with this?

Roger Ward

Perhaps there is an additonal invalid character that causes the syntax error.

Try this:

Hi Oscar,

Thanks for writing up this great guide which has been so useful for many people.

I'm hoping that you can help me out with a particular request.

The way that the lookup_concat function is currently configured, a "look_up_value" is required. Are you able to assist me by providing vba code that doesn't require a "look_up_value", but instead looks for any cell in the "Search_in_column" that is not equal to zero?

I tried the first bit of vba code up top and get a #VALUE error in Excel 2016.

Corey Hammer,

Can you describe in greater detail? Perhaps you forgot to enter a needed argument.

you can use a combination of textjoin and filter function:

you can use a combination of textjoin and filter function:

=textjoin(char(10), TRUE,FILTER( F:F , E:E = A2 ))

where A2 is the search string

F:F is a column range with results to return

E:E is a column range where to search from

Natasha,

Thank you for your comment. The FILTER function is not yet available for all users?

Hi

very nice thread

I used this to concatinate values into one cell

i have multiple values in cell

example

apple, mango, orange

apple,mango

orange

now I want to highlight the cell that has only apple and mango (two values)

if I use your formula here https://www.get-digital-help.com/quickly-highlight-records-in-a-list-in-excel-and-logic/

If I put "apple" (in one celll) and 'mango' (in second cell) as my search criteria

I get both first and second cell highlighted

how can i select the cells that has only the values mango and apple (exact string match)?

thank you in advance

Hi I have added the UDF for the wildcard search VBA code and it works great. I want these results to be concatenated with a user defined delimiting character much like the non-wild card UDF.

In the normal UDF you put Lookup_concat("Target","A1:A10","B1:B10","-") to add a delimiting character of - between each concatenation.

However the wild card version automatically puts a space in between results. Is there an adjustment I can make to the UDF so the wild card version also has a user defined delimiting character as the last argument?

Thanks in advance!

Hi Everyone,

Still use this fantastic UDF a lot (thanks again Oscar) and still trying to keep the colour formatting from the original cell text. Hoping someone can assist. I've tried to modify the formula but get a #value error.

Much appreciated....

thanks Oscar - this works a treat for what I need it for, much appreciated

Hi-

Thanks so much for your website and all of the helpful information it's included - you've saved me hours of time and I am greatly appreciative! I used your formula to successfully return multiple dates concatenated into one cell. The formula I currently use is:

`=TEXTJOIN(", ", TRUE, TEXT(IF(IFERROR(MATCH($L$2:$L$1600, IF(A2=$H$2:$H$1600, $L$2:$L$1600, ""), 0),"")=MATCH(ROW($L$2:$L$1600), ROW($L$2:$L$1600)), $L$2:$L$1600, ""),"MM/D/YYYY"))`

Which, for an example, returns "12/10/2020, 12/9/2020, 12/20/2020, 12/23/2020, 12/30/2020, 12/29/2020" in cell C2.

This works great, but my question is: is there a way to have the formula return the dates in chronological order? So, using my previous example, the result in cell C2 would instead be: "12/9/2020, 12/10/2020, 12/20/2020, 12/23/2020, 12/29/2020, 12/20/2020"

`Thank you in advance!`

Thank you Hannah.

Use this formula if you are an Excel 365 subscriber :

=TEXTJOIN(", ", TRUE, TEXT(SORT(IF(IFERROR(MATCH($L$2:$L$1600, IF(A2=$H$2:$H$1600, $L$2:$L$1600, ""), 0),"")=MATCH(ROW($L$2:$L$1600), ROW($L$2:$L$1600)), $L$2:$L$1600, "")),"MM/D/YYYY"))

It contains the SORT function which is not available for earlier Excel versions.

Hi Oscar, I am trying to have a cell return all professors who are planning to teach a specific course number. So on Sheet 1, column A has each course number, and the text join function should go in column B corresponding to each course. All the the data is on a separate sheet, 'Spring 2022'.

I have tried the basic =TEXTJOIN(", ", TRUE, IF(A4='Spring 2022'!$C$2:$C$100, 'Spring 2022'!$H$2:$H$100, ""))

which returns literally every professor on the data tab, even if they don't match the course number I am looking for. At least it is returning something relevant, but not every professor is teaching a single course so this is clearly wrong.

I have also tried the duplicate removal code =TEXTJOIN(", ", TRUE, IFERROR(IF(MATCH('Spring 2022'!$H$2:$H$100, IF(A3='Spring 2022'!$C$2:$C$100, 'Spring 2022'!$H$2:$H$100, ""), 0)=MATCH(ROW('Spring 2022'!$H$2:$H$100), ROW('Spring 2022'!$H$2:$H$100)), 'Spring 2022'!$H$2:$H$100),""))

which simply returns "false".

Can you tell me what I'm doing wrong? For the record this is in Google Sheets, not excel.

Nevermind! I solved my problem.

I have used the UDF "Split search string using a delimiting character and return multiple matching values concatenated into one cell" to fix an issue I have had with data validation, and it is excellent. Is there a way to "force" the result to appear in A2 in the same order as the "lookup" cell A1 e.g

A1 A2

T31 Text2

T2 Text5

T5 Text31

My lookup tables are sorted alphanumerically as they are required for other projects

Many Thanks